XFOR: Problem Installing MCIS News Server with Banyan NT 4.x Client (162406)
The information in this article applies to:
- Microsoft Commercial Internet System 1.0
This article was previously published under Q162406 SYMPTOMS
When you attempt to install the Microsoft Commercial Internet System (MCIS)
News Server on a computer running Windows NT Server that has the Banyan NT
4.xx Client installed, setup stops responding with an Ins0432_mp.exe error
after the program groups are created.
CAUSE
The problem seems to be related to the fact that the Banyan NT Client is
running its own TCP/IP stack.
WORKAROUND
To work around this problem, remove the Banyan Client while installing the
MCIS News Server. After installation is complete, reinstall the Banyan
Client. If the problems still occur, you will need to remove the Banyan
Client while running the MCIS News Server, or try an earlier version of the
Banyan Client.
STATUS
Microsoft has confirmed this to be a problem in Commercial Internet System
version 1.0. We are working with Banyan and researching this problem, and
will post new information here in the Microsoft Knowledge Base as it
becomes available.
| Modification Type: | Major | Last Reviewed: | 9/30/2003 |
|---|
| Keywords: | KB162406 |
|---|
|