Windows NT Does Not Detect Previous Window NT 3.5x Installation (159995)


The information in this article applies to:

  • Microsoft Windows NT Workstation 3.51
  • Microsoft Windows NT Workstation 4.0
  • Microsoft Windows NT Server 3.51
  • Microsoft Windows NT Server 4.0
This article was previously published under Q159995

SYMPTOMS

When you attempt to upgrade your current version of Windows NT, the following error message may appear:
A previous version of Windows NT could not be found on the system, Press F3 to exit.
If you are using the Upgrade CD-ROM Media, the following error message may appear:
No previous version of Windows NT could be found on your computer. Setup is unable to verify that you qualify to use this upgrade product. Press F3 to exit.
If you have a previous version of Windows NT, Setup lets you install a new copy of Windows NT 4.0, but Setup will not allow you to upgrade to Windows NT 4.0.

RESOLUTION

Use the Registry Editor (Regedt32.exe) to modify the following values:

WARNING: Using Registry Editor incorrectly can cause serious, system-wide problems that may require you to reinstall Windows NT to correct them. Microsoft cannot guarantee that any problems resulting from the use of Registry Editor can be solved. Use this tool at your own risk.

  1. Start Registry Editor (Regedt32.exe) and locate the following subkey:
    Hkey_Local_Machine\System\Setup\SystemSetupInProgress Hkey_Local_Machine\System\Setup\UpgradeInProgre
  2. Double-click SystemSetupInProgress and change the value from 1 to 0.
  3. Locate the following subkey:
    Hkey_Local_Machine\Software\Microsoft\WindowsNT\ CurrentVersion
  4. Verify the following registry entry is set to 3.5 or 3.51.
    CurrentVersion:REG_SZ:3.5 or 3.
  5. Quit Registry Editor and then restart your computer for these changes to take effect.
Clearing both to zero will allow Windows NT to prompt for the previous installation upgrade.

NOTE: For additional information on difficulty upgrading Windows NT 4.0, please see the following articles in the Microsoft Knowledge Base:

ARTICLE-ID: 154538
TITLE: Windows NT 4.0 Upgrade CD Will Not Upgrade NT 4.0 Installation

ARTICLE-ID: 160175
TITLE: What Does WinNT 4.0 look for in a Valid WinNT 3.51 Install

MORE INFORMATION

During the upgrade process, Windows NT Setup verifies the following before providing an upgrade option to existing installations. If the above steps do not resolve the upgrade option, verify the following components are present and/or correct.
  • Ensure the current version of Windows NT is bootable before proceeding with an upgrade.
  • Make sure the SCSI or IDE controller detected by Windows NT 4.0 Setup is the correct driver. (You may need to select F6 during setup do manually install the correct driver.)
  • The Boot.ini file must contain a valid ARC path for the current system partition.
  • A valid Setup.log file must be present in the %SystemRoot%\Repair directory.
  • You must break any mirror sets on the boot or system partition before upgrading.

STATUS

Microsoft has confirmed this to be a problem in Windows NT version 4.0. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.
Modification Type:MajorLast Reviewed:8/9/2001
Keywords:kbsetup KB159995
©2002 Microsoft Corporation. All rights reserved.