Host TPX Application Problem Leads to 3270 Emulator 2004 Error (153457)


The information in this article applies to:

  • Microsoft SNA Server 2.0, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 2.1, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 2.11 SP1, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 2.11 SP2, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 3.0 SP1, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 3.0 SP2, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 3.0 SP3, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 3.0 SP4, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 4.0, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 4.0 SP1, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 4.0 SP2, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 4.0 SP3, when used with:
    • the operating system: Microsoft Windows NT
This article was previously published under Q153457

SYMPTOMS

When you use TPX version 4.0.03 on an IBM MVS system (MVS v5.1 and VTAM v4r2), you will get the following Windows NT application event log entry indicating a 3270 emulation error using SNA Server and Wall Data Rumba.
Event 21
Negative response sent on connection <value> (SENSE = 2004)
Where 2004 indicates a DIRECTION ERROR. See the "IBM SNA Formats Guide" (IBM part number GA27-3136) for a description of SNA sense code errors.

NOTE: If this specific problem occurs, it would occur with any 3270 emulator. To confirm this is the problem, SNA Server DLC and 3270 message traces should be captured.

CAUSE

The TPX host application sends a message to the 3270 emulator when it did not have the direction flag. An SNA Server DLC message trace shows the following message sequence: 
SNA Server     Host (TPX)
--------------------------------------------------------
         <- BIND (appname = "TPX")
BIND +RSP ->
         <- SDT
SDT +RSP ->

RQE FMD BC EC DR1 BB CD ->
(User Request)

         <- RQE FMD BC EC DR1 CD
            (TPX response)

RQE FMD BC EC DR1 CD BBIU ->
(Security system screen)

(second part) EBIU ->

         <- RQE FMD BC EC DR1 CD
            (TPX response)

         <- RQE FMD BC EC DR1 EB
            (NCCF NETVIEW screen data)

-RSP FMD SD BC EC DR1 ->
(sense code 20040000)
In the above flow diagram, the TPX application sends an FMD message (the NCCF Netview screen) after it is already sent the Change Direction flag on the previous message. This is an SNA protocol violation that causes SNA Server to send a 2004 error (direction error).

RESOLUTION

Modification Type:MinorLast Reviewed:3/17/2005
Keywords:KB153457
©2004 Microsoft Corporation. All rights reserved.