Apple LaserWriter Pro 810 and TCP/IP Require Updated ROM (151492)


The information in this article applies to:

  • Microsoft Windows NT Workstation 3.5
  • Microsoft Windows NT Workstation 3.51
  • Microsoft Windows NT Server 3.5
  • Microsoft Windows NT Server 3.51
This article was previously published under Q151492

SUMMARY

When you attempt to print from a Windows NT computer to an Apple LaserWriter Pro 810 using the TCP/IP protocol, the print job may appear in the queue, but it does not print. The job must be deleted manually. The printer will also have to be reset in order for it to work with Macintosh clients. The Windows NT computer can ping the printer and the printer works when printing directly from a Macintosh client.

MORE INFORMATION

To print from a Windows NT server or workstation to an Apple LaserWriter Pro 810 using the TCP/IP protocol, an updated ROM is required for the printer.



For more information on obtaining the updated ROM for the Apple LaserWriter Pro 810, contact Apple Technical support.

For information about how to contact Apple, query in the Knowledge Base for one of the following articles:

65416Hardware and Software Third-Party Vendor Contact List, A-K

60781Hardware and Software Third-Party Vendor Contact List, L-P

60782Hardware and Software Third-Party Vendor Contact List, Q-Z

Modification Type:MajorLast Reviewed:12/16/2003
Keywords:KB151492
©2003 Microsoft Corporation. All rights reserved.