LocalLUs Parameter Displays Printer LUs as Display LUs (151195)


The information in this article applies to:

  • Microsoft SNA Server 2.0, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 2.1, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 2.11, when used with:
    • the operating system: Microsoft Windows NT
  • Microsoft SNA Server 2.11 SP1, when used with:
    • the operating system: Microsoft Windows NT
This article was previously published under Q151195
IMPORTANT: This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base:

256986 Description of the Microsoft Windows Registry

SYMPTOMS

If 3270 Printer LUs are assigned to a computer using the LocalLUs parameter, the printer LU names are improperly displayed as 3270 Display LUs when viewed in a 3270 Emulator.

CAUSE

The LocalLUs parameter was not designed to support printer LUs.

RESOLUTION

A new parameter called LocalPrinterLUs has been added to provide the capability of assigning printer LUs to a computer. If this parameter is present on a SNA Server client, the printer LUs in the User/Group record are replaced with the printer LUs specified in the LocalPrinterLUs parameter. The LocalPrinterLUs parameter supports a maximum of 10 printer LUs.

The LocalPrinterLUs parameter is specified as follows:

Win3x Clients

  • Add the following entry to the [WNAP] Section of the WIN.INI file:

    LocalPrinterLUs=<PrinterLUName1> <PrinterLUName2> ...<PrinterLUNameX>

    where <PrinterLUNameX> are LU names separated by spaces.

Windows 95 Clients

WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

  • Run the Registry Editor (REGEDIT), and locate the following key: 
              HKEY_LOCAL_MACHINE
              SOFTWARE
                  Microsoft
                      SnaBase
                          Parameters
  • Add the following string value to the Registry key:

    String Value Name: LocalPrinterLUs
    Data: <PrinterLUName1> <PrinterLUName2> ... <PrinterLUNameX>

    where <PrinterLUNameX> are LU names separated by spaces.
  • Close the Registry Editor.

Windows NT Clients

WARNING: Using Registry Editor incorrectly can cause serious, system-wide problems that may require you to reinstall Windows NT to correct them. Microsoft cannot guarantee that any problems resulting from the use of Registry Editor can be solved. Use this tool at your own risk.
  • Run the Registry Editor (REGEDT32), and locate the following key: 
          HKEY_LOCAL_MACHINE
         SYSTEM
             CurrentControlSet
                Services
                   SnaBase
                      Parameters
  • Add the following value to the Registry key:

    Value Name: LocalPrinterLUs Data Type:  REG_SZ Data:      <PrinterLUName1> <PrinterLUName2> ...<PrinterLUNameX>

    where <PrinterLUNameX> are LU names separated by spaces.
  • Close the Registry Editor.
The following files have been updated to add the support for the new LocalPrinterLUs parameter:

Win3x Clients: <winroot>\System\Wdmod.dll
Windows 95 Clients: <winroot>\System\Snadmod.dll
Windows NT Clients: <snaroot>\System\Snadmod.dll

STATUS

Microsoft has confirmed this to be a problem in SNA Server versions 2.0, 2.1, 2.11, and 2.11.sp1. This problem was corrected in the latest Microsoft SNA Server 2.11 U.S. Service Pack. For information on obtaining the service pack, query on the following word in the Microsoft Knowledge Base (without the spaces):

S E R V P A C K

MORE INFORMATION

The LocalLUs parameter is used to specify the LUs to be used on the system, regardless of which user is logged on. If this variable is not used, SNA Server assigns LUs based on the User/Group records defined in SNA Server Admin. Reference to Appendix C of the SNA Server "Reference Guide" for more details on the LocalLUs parameter.

For additional information on how SNA Server currently handles assigning LUs to a computer, please see the following article in the Microsoft Knowledge Base:

149802 Assigning 3270 LUs to Workstations Using SNA Server Client

Modification Type:MajorLast Reviewed:11/26/2003
Keywords:kbbug kbfix kbnetwork kbsetup KB151195
©2003 Microsoft Corporation. All rights reserved.