NWLNKSPX May Reset Connection With Out-Of-Sequence Packet (150838)
The information in this article applies to:
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 3.51
This article was previously published under Q150838 SYMPTOMS
Client connections may be dropped or reset when you do a query against a
Windows NT server running NWLNKSPX.
CAUSE
When an application requests data from an application running on a Windows
NT server, the server will send multiple data packets to the client
workstation after receiving the request from the client station.
If the client fails to send an acknowledgment (ACK) packet within 0.6
seconds, the server will retransmit the same data packet again. If the
workstation then sends an ACK packet to acknowledge the initial data
received from the server, the destination address of the ACK packet will
zero out, and the server will drop the ACK packet and try to retransmit the
same data packet again until the retry count is exhausted.
RESOLUTION
NWLNKSPX has been changed to ensure that packet sequencing is checked and
the remote ACK address is not dropped.
STATUS
Microsoft has confirmed this to be a problem in Windows NT versions 3.5 and
3.51. This problem was corrected in the latest Windows NT 3.51 U.S. Service
Pack. For information on obtaining the Service Pack, query on the following
word in the Microsoft Knowledge Base (without the spaces):
| Modification Type: | Major | Last Reviewed: | 12/16/2003 |
|---|
| Keywords: | KB150838 |
|---|
|