Fixes to SNA Server 2.11 SP1 Barr Channel Link Service (150570)
The information in this article applies to:
- Microsoft SNA Server 2.11, when used with:
- the operating system: Microsoft Windows NT
- Microsoft SNA Server 2.11 SP1, when used with:
- the operating system: Microsoft Windows NT
This article was previously published under Q150570 SYMPTOMS
When you use the SNA Server 2.11 Service Pack 1 Barr Channel Link Service,
the following can occur:
- LUs do not activate after the connection is active.
- A connection using the Barr Systems, Inc. Link service does not recover
from system reset. This is commonly seen after host IPL. The connection
must be stopped and restarted in order for the connection be go active.
RESOLUTION
A flow control problem that occurred during LU activation has been
fixed. All LUs now become active at startup.
Also, the link service automatically recovers and activates the link.
Barr Channel Link Service version #9601 corrects both of these problems.
Contact Barr Systems, Inc. at (800) 227-7797 for this driver update. A
workaround is to revert to the SNA Server 2.11 version of Barr Channel Link
Service and driver.
STATUS
Microsoft has confirmed this to be a problem in SNA Server version
2.11.sp1.
This problem was corrected in the latest Microsoft SNA Server 2.11 U.S.
Service Pack. For information on obtaining the service pack, query on the
following word in the Microsoft Knowledge Base (without the spaces):
| Modification Type: | Major | Last Reviewed: | 11/19/2003 |
|---|
| Keywords: | kbbug kbfix kbnetwork KB150570 |
|---|
|