Downstream PU Fails to Reactivate After an Outage (150472)
The information in this article applies to:
- Microsoft SNA Server 2.0, when used with:
- the operating system: Microsoft Windows NT
- Microsoft SNA Server 2.1, when used with:
- the operating system: Microsoft Windows NT
- Microsoft SNA Server 2.11, when used with:
- the operating system: Microsoft Windows NT
- Microsoft SNA Server 2.11 SP1, when used with:
- the operating system: Microsoft Windows NT
This article was previously published under Q150472 SYMPTOMS
The Downstream PU fails to reactivate after an outage. The event viewer
will show the following in the application log:
Event ID: 29
Description: Internal Gateway error
CAUSE
The Downstream PU connection is not terminating properly after an outage.
The improper termination causes problems when you try to reactivate the
connection.
RESOLUTION
A hotfix is available from Microsoft Product Support Services. Files that
have been modified to correct this problem are SNASERVR.EXE and
TRCSERVR.EXE.
STATUS
Microsoft has confirmed this to be a problem in Microsoft SNA Server
versions 2.0, 2.1, 2.11, and 2.11.sp1.
This problem was corrected in the latest Microsoft SNA Server 2.11 U.S.
Service Pack. For information on obtaining the service pack, query on the
following word in the Microsoft Knowledge Base (without the spaces):
| Modification Type: | Major | Last Reviewed: | 11/26/2003 |
|---|
| Keywords: | kbbug kbfix kbnetwork KB150472 |
|---|
|