After RPLCMD Is Used, "Required" Is Misspelled (149414)
The information in this article applies to:
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 3.51
This article was previously published under Q149414 SYMPTOMS
When you use the RPLCMD to set the password options for a remoteboot client
from the default "optional" to "required," the outcome is misspelled
"requred."
CAUSE
The problem appears to be a misspelling in the code for the line:
RemoteBoot password is required
Steps to Reproduce- Run RPLCMD at a command prompt.
- Select "W" at:
Adapter Boot Config Profile Service Vendor Wksta [Quit]:
- Select "S" at:
Add Clone Del Enum GetInfo SetInfo:
- Select "2" at:
Information Level <0, 1 or 2> =
- Select "any RPL workstation" at:
- Select "any new RPL workstation" at:
- Leave WkstaNameComment blank
- Select "R" at:
Is Remoteboot password Required, Optional or Not solicited [R,O,N] =
- Leave defaults on all other items
- After SetInfo has completed, select "W" at:
Adapter Boot Config Profile Service Vendor Wksta [Quit]:
- Select "G" at:
Add Clone Del Enum GetInfo SetInfo:
- Select "2" and "WkstaName" at:
Input Information Level <0, 1 or 2> and WkstaName
The misspelled word "requred" is on the second line of the displayed
information.
RESOLUTION
There is no resolution at this time.
STATUS
Microsoft has confirmed this to be a problem in Windows NT versions 3.5 and
3.51. We are researching this problem and will post new information here in
the Microsoft Knowledge Base as it becomes available.
| Modification Type: | Major | Last Reviewed: | 10/12/2003 |
|---|
| Keywords: | KB149414 |
|---|
|