Using UMAX Scanners with Windows NT (149349)


The information in this article applies to:

  • Microsoft Windows NT Workstation 3.5
  • Microsoft Windows NT Workstation 3.51
  • Microsoft Windows NT Server 3.5
  • Microsoft Windows NT Server 3.51
This article was previously published under Q149349

SUMMARY

Although UMAX scanners are not supported directly by Microsoft, you can use UMAX scanner models UC630, UC840, UC1200SE, UC1260, PowerLook, Vista- S6, Vista-S8, Vista-T630, Mirage D-16L, PowerLook II, and Gemini D-16 with Windows NT.

MORE INFORMATION

UMAX offers Windows NT drivers that support the adapters that are bundled with the scanner as well as other ASPI-compliant SCSI adapters. These drivers are not included with UMAX scanners but are available from UMAX directly.

Currently, the driver needed to use a UMAX scanner on Windows NT is MagicScan version 2.2 for Windows NT. Version 2.3 is now available. The scanners supported are the UC630, UC840, UC1200SE, UC1260, PowerLook, Vista- S6, Vista-S8, Vista-T630, Mirage D-16L, PowerLook II, and Gemini D-16. The driver also supports the UDS-IS10, UDS-IS11, and ASPI-compatible SCSI adapters.

For additional information, contact UMAX Technical Support at (510) 651- 8883, or visit the following UMAX Web site:

http://www.umax.com.


The product described here is manufactured by UMAX, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.
Modification Type:MajorLast Reviewed:12/16/2003
Keywords:KB149349
©2003 Microsoft Corporation. All rights reserved.