How to Check for a Faulty Math Coprocessor (145692)


The information in this article applies to:

  • Microsoft Windows Millennium Edition
  • Microsoft Windows 98 Second Edition
  • Microsoft Windows 98
  • Microsoft Windows 95
This article was previously published under Q145692

SUMMARY

This article describes how to use Device Manager to determine if the math coprocessor in your computer is faulty. The procedure in this article applies to math coprocessors built into 80486 and Pentium processors, and to math coprocessors that have been installed separately.

MORE INFORMATION

To determine if the math coprocessor installed in your computer is faulty, follow these steps:
  1. In Control Panel, double-click System.
  2. Click the Device Manager tab.
  3. Double-click System Devices, and then double-click Numeric Data Processor.
  4. Click the Settings tab. If the math coprocessor is faulty, the following message is displayed in the Diagnostics box:

    The numeric processor in this computer can sometimes compute inaccurate results when dividing large numbers.

    If the math coprocessor is not faulty, the following message is displayed in the Diagnostics box:

    Your computer's numeric data processor has passed all diagnostic tests and appears to be working properly.

Modification Type:MinorLast Reviewed:12/16/2004
Keywords:kbHardware kbhowto KB145692
©2004 Microsoft Corporation. All rights reserved.