XCLN: PST Compaction Settings in the MSPST.INI (143384)
The information in this article applies to:
- Microsoft Exchange Client 4.0
- Microsoft Exchange Client 5.0
- Microsoft Exchange Windows NT client 4.0
- Microsoft Exchange Windows NT client 5.0
This article was previously published under Q143384 SUMMARY
This article lists and explains the entries for the [NDB] section of the
Microsoft Exchange Windows client initialization file, MSPST.INI.
NOTE: The MSPST.INI file must be in the root of the Microsoft Windows
installation, by default C:\WINDOWS.
MORE INFORMATION
[NDB]
CompactDelay=<number of seconds>
This sets the minimum amount of delay in seconds before it starts
compaction.
The default is value 300 seconds, which equals 5 minutes.
CompactDisable=<0/1>
Set this value to 1 to disable idle time compaction.
The default value is 0 (idle time compaction enabled).
CompactInterval=<number of centiseconds>
Sets the number of seconds of system inactivity before compaction is
started.
The default is 100 centiseconds, which equals 1 second.
CompactQuantum=<number of centiseconds>
Sets the idle time for Quantum compaction.
The default is 20 centiseconds, which equals .2 seconds.
CompactStopPct=<number>
The background compaction will stop when the amount of recoverable space
falls below this percentage of the total PST.
The default is 4%.
CompactStopFree=<number of kilobytes>
The background compaction will stop when there is less than this much
recoverable space in your PST.
The default is 16.
| Modification Type: | Minor | Last Reviewed: | 8/16/2005 |
|---|
| Keywords: | kbother KB143384 |
|---|
|