BUG: German Windows NT 3.51 Uses Wrong SNMP-Trap Port (142824)


The information in this article applies to:

  • Microsoft Windows NT Server 3.51
  • Microsoft Windows NT Workstation 3.51
This article was previously published under Q142824

SYMPTOMS

SNMP traps sent by a computer running Microsoft Windows NT will never be received by an SNMP management system. Also an SNMP management system running on German Windows NT never receives traps from any SNMP agent.

CAUSE

There is an incorrect entry in the %SystemRoot%\System32\Drivers\Etc\Services file, which states the port address for the SNMP-Trap is 167/udp instead of 162/udp: 

   snmp-trap         167/udp    snmp


This causes the trap to be received by the NetBIOS name service, which is unable to deal with the format of an SNMP-Packe, so it just times out.

WORKAROUND

Manually change the entry to: 

   snmp-trap         162/udp    snmp

STATUS

Microsoft has confirmed this to be a problem in the products listed. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.
Modification Type:MajorLast Reviewed:11/4/2003
Keywords:kbbug KB142824
©2003 Microsoft Corporation. All rights reserved.