SUMMARY
The following information is provided by Epson of America.
To obtain the best quality output support using the new updated Epson
Stylus driver (Version 3.30), please use the following table to adjust the
Gamma RGB values.
The Recommended values are:
Resolution Paper Type Stylus COLOR Stylus Pro Stylus Pro XL
-------------------------------------------------------------------
360 Plain 1.0 1.0 1.0
360 Coated 360 dpi 1.0 1.0 1.0
360 Coated 720 dpi 1.5 1.5 1.5
720 Coated 720 dpi 1.0 0.7 0.7
To make these modifications please do the following:
The steps outlined are for permanent changes to the Gamma. If you desire to
change it only on an as needed basis, then make your modifications from
your Windows Application.
[Per Job Modification]
- Print Setup
- Select Properties
- Choose Halftone
- Choose Input RGB Gamma
- Make the modifications based on the table above.
[Permanent Modification]
- Highlight the Epson Stylus Series driver (Using PrintManager)
- Select Properties from the Printer Menu
- Choose Details, Job Defaults, Halftone
- Choose Input RGB Gamma
- Make the modifications based on the table above.
The information included here is provided by a vendor independent of
Microsoft; we make no warranty, implied or otherwise, regarding the
accuracy of the information or the output produced.