Multiple CRC Errors and Hardware Overruns Using RAS (139494)
The information in this article applies to:
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Server 3.51
This article was previously published under Q139494 SYMPTOMS
RAS Monitor reports multiple CRC errors and Hardware Overruns when you
transfer files over a Remote Access Service (RAS) connection. This problem
occurs on your Windows NT 3.51 RAS client computer if you have installed
Windows NT 3.51 Service Pack 2 and you are using the ATAPI.SYS device
driver.
NOTE: The ATAPI.SYS device driver is used for IDE CD-ROM drives and
Enhanced IDE (EIDE) hard disks.
RESOLUTION
To resolve this problem, use one of the following:
- Use the Atapi.sys device driver from the original Windows NT 3.51
distribution media. Copy the original Windows NT 3.51 Atapi.sys file to
your %SystemRoot%\system32\drivers directory.
NOTE: This workaround should be used only if you do not require the
updated ATAPI.SYS device driver included in Windows NT 3.51 Service Pack
2 for proper functionality of your EIDE hard disk.
-or- - Obtain the latest Service Pack for Windows NT.
STATUS
Microsoft has confirmed this to be a problem in Windows NT version 3.51.
This problem was corrected in the latest Windows NT 3.51 U.S. Service Pack.
For information on obtaining the Service Pack, query on the following word
in the Microsoft Knowledge Base (without the spaces):
| Modification Type: | Major | Last Reviewed: | 11/4/2003 |
|---|
| Keywords: | kbother KB139494 |
|---|
|