No Ball on Table in 3D Pinball (138990)
The information in this article applies to:
- Microsoft Plus! for Windows 95
This article was previously published under Q138990 SYMPTOMS
When you play 3D Pinball, or click Demo to watch a demonstration, no ball
may be loaded on the table. When this occurs, the flippers, sound, music,
and plunger still work, and the displayed status is "Awaiting deployment."
CAUSE
This problem can occur on computers with a faulty math coprocessor, or when
an incompatibility exists between the math coprocessor and an outdated
system BIOS.
RESOLUTION
To work around this problem, disable the math coprocessor in Device
Manager. To do so, follow these steps:
- In Control Panel, double-click the System icon.
- On the Device Manager tab, double-click System Devices, and then
double-click Numeric Data Processor.
- On the Settings tab, click "Never use the numeric data processor,"
and then click OK.
NOTE: This resolution is a temporary workaround only for 3D Pinball. When
you use the "Never use the numeric data processor" option, you may not be
able to run programs that depend on the use of a math coprocessor.
STATUS
Microsoft has confirmed this to be a problem in Microsoft Plus! for
Windows 95, version 1.0. We are researching this problem and will post
new information here in the Microsoft Knowledge Base as it becomes
available.
MORE INFORMATION
3D Pinball uses floating-point calculations, and may attempt to use the
math coprocessor if one is present.
| Modification Type: | Major | Last Reviewed: | 9/4/1999 |
|---|
| Keywords: | KB138990 |
|---|
|