Driver for Compaq NetFlex32 Integrated Ethernet Adapter (137923)
The information in this article applies to:
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 3.51
This article was previously published under Q137923 SYMPTOMS
On your computer that is running Windows NT and has the Compaq NetFlex32
integrated Ethernet adapter in the motherboard, when you install the Compaq-
supplied Support Software Diskette (SSD) drivers for the NetFlex and
NetFlex3 cards, your network card fails to function.
CAUSE
The Compaq-supplied SSD drivers for the NetFlex and NetFlex3 cards are not
designed to work with the integrated Netflex32 Ethernet adapter.
RESOLUTION
Compaq recommends the PCNTN3.SYS driver for use with the NetFlex32
integrated Ethernet adapter with Windows NT 3.5 and 3.51.
To install the PCNTN3.SYS drivers:
- Run Control Panel and choose Network.
- Choose Add Adapter.
- From the drop-down list box of adapters select "<Other> Requires disk
from manufacturer".
- Insert the SSD 1.15 disk into drive A and choose Continue.
- Select the PCNTN3.SYS driver located on the SSD disk in \NET\PCNTN3
directory.
MORE INFORMATION
Use SSD 1.15 or later with Windows NT 3.51.
Use SSD 1.14 with Windows NT 3.5.
Compaq SSDs are available from the Compaq BBS at (713)378-1418 or on
CompuServe in the CPQFORUM.
The third-party products discussed here are manufactured by Compaq
Corporation , a vendor independent of Microsoft; we make no warranty,
implied or otherwise, regarding these products' performance or reliability.
| Modification Type: | Major | Last Reviewed: | 12/16/2003 |
|---|
| Keywords: | KB137923 |
|---|
|