STOP 0x0000001E or System Hangs When Mirroring Seagate ST32550 (137148)


The information in this article applies to:

  • Microsoft Windows NT Server 3.5
  • Microsoft Windows NT Server 3.51
This article was previously published under Q137148

SYMPTOMS

When you perform mirroring on a FAT or NTFS system partition on a Seagate ST32550N (Firmware Revision 14) hard disk connected to a DPT 2022 or 2122 SCSI controller (Firmware Revision 06B0 BIOS 2.D7), the following STOP error message appears in Windows NT 3.5:
STOP: 0x0000001E
KMODE_EXCEPTION_NOT_HANDLED

When you perform the same procedure above in Windows NT 3.51, the Windows NT stops responding (hangs).

CAUSE

This problem occurs when Revision 14 of the Seagate hard-disk firmware is used.

RESOLUTION

Upgrade the firmware of the Seagate 32550N hard disk to Revision ASA2 16.
Modification Type:MajorLast Reviewed:11/3/2003
Keywords:KB137148
©2003 Microsoft Corporation. All rights reserved.