RAS Not Saving Terminal & Script Options for ISDN or X.25 Ports (137136)
The information in this article applies to:
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 3.51
This article was previously published under Q137136 SYMPTOMS
The Remote Access Terminal and script features do not work if you use them
to call a remote access server with your ISDN card (for example, a
Digiboard ISDN card) or your X.25 card (for example, an Eicon X.25 card).
If you select one of these features for an item in your list of remote
access servers in Remote Access, your Terminal or script selection is only
saved until you quit Remote Access. When you restart Remote Access your
Terminal or script selection is missing.
NOTE: These features are available with X.25 modem dial-up, because you are
using a serial port on your computer.
WORKAROUND
To work around this problem, call the remote access server by configuring
the item on your list of remote access servers to use a serial port on your
computer, that is, use a null-modem cable or an internal or external modem
to call the remote access server.
STATUS
Microsoft has confirmed this to be a problem in Windows NT versions 3.5
and 3.51. We are researching this problem and will post new information
here in the Microsoft Knowledge Base as it becomes available.
| Modification Type: | Major | Last Reviewed: | 12/16/2003 |
|---|
| Keywords: | KB137136 |
|---|
|