CD-ROM Drive Not Recognized with BusLogic 946C SCSI Controller (137012)


The information in this article applies to:

  • Microsoft Windows 95
This article was previously published under Q137012

SYMPTOMS

After you install Windows 95 on a computer with a BusLogic 946C SCSI controller, you may experience either of the following problems:
  • The SCSI controller is not recognized by Windows 95.
  • Hard disks on the SCSI chain are recognized, but a CD-ROM drive on the chain is not recognized.

RESOLUTION

To resolve this problem, update the SCSI controller to firmware revision 4.22 and BIOS revision 4.86 or later. Please contact BusLogic for information about obtaining these upgrades.

MORE INFORMATION

You can use the BusLogic AutoSCSI tool included with the SCSI controller to determine the controller's version information. For information about this tool, please consult the controller's documentation.

The third-party product discussed in this article is manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.
Modification Type:MajorLast Reviewed:12/17/2000
Keywords:KB137012
©2002 Microsoft Corporation. All rights reserved.