NET PASSWORD on Windows for Workgroups Causes Error 2453 (136873)
The information in this article applies to:
- Microsoft Windows NT Server 3.51
- Microsoft TCP/IP-32 for Windows for Workgroups 3.11
- Microsoft TCP/IP-32 for Windows for Workgroups 3.11a
- Microsoft TCP/IP-32 for Windows for Workgroups 3.11b
- Microsoft Windows for Workgroups 3.11
This article was previously published under Q136873 SYMPTOMS
On your computer running Windows for Workgroups version 3.11, after you log
on to your Windows NT 3.51 primary domain controller (PDC) that is in a
different subnet and you issue the command:
NET PASSWORD /DOMAIN:<domain> <username> <old_password> <new_password>
your password is not changed and the following error message appears:
Error 2453: Unable to find domain controller for this domain.
CAUSE
A problem with the NET PASSWORD command in Windows for Workgroups causes
this command to not find the PDC if there are no backup domain controllers
(BDC) in the same subnet as the Windows for Workgroups computer.
WORKAROUND
To work around this problem:
- If you want to use the NET PASSWORD command, install a BDC in the same
subnet as your computer running Windows for Workgroups.
-or-
Use the graphical user interface on your computer running Windows for
Workgroups:
- Run Control Panel and choose Network.
- Choose Startup and then Set Password.
- Type your old password in the Old Password field.
- Type your new password in the New Password and the Confirm New
Password fields and choose OK.
STATUS
Microsoft has confirmed this to be a problem in Microsoft TCP/IP-32 for
Windows for Workgroups version 3.11b. We are researching this problem and
will post new information here in the Microsoft Knowledge Base as it
becomes available.
| Modification Type: | Major | Last Reviewed: | 12/5/2003 |
|---|
| Keywords: | KB136873 |
|---|
|