No Prompt to Restart When Adding SNMP Community Names (135597)
The information in this article applies to:
- Microsoft Windows NT Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Workstation 4.0
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 3.51
- Microsoft Windows NT Server 4.0
This article was previously published under Q135597 SYMPTOMS
When you add an SNMP Community Name the Network Settings dialog box closes
without presenting the Restart dialog box. If you do not restart the
computer, the SNMP Community Name information is not recognized.
WORKAROUND
To work around this problem, after adding SNMP information, shutdown and
restart Windows NT or stop and restart the SNMP service in Control Panel
Services.
STATUS
Microsoft has confirmed this to be a problem in Windows NT Workstation and
Server versions 3.51 and 4.0. We are researching this problem and will post
new information here in the Microsoft Knowledge Base as it becomes
available.
| Modification Type: | Major | Last Reviewed: | 5/7/2003 |
|---|
| Keywords: | kbnetwork KB135597 |
|---|
|