Err Msg: Your Network Adapter HP27252 Is Not Configured... (135189)
The information in this article applies to:
This article was previously published under Q135189 SYMPTOMS
When you start Windows 95, you may receive the following error message:
Your network adapter HP27252 is not configured correctly. You may need
to set it up again.
If you click OK, Windows 95 starts normally and the network functions
correctly.
CAUSE
This error message can occur if you are using a Hewlett-Packard HP27252
ISA Ethernet network adapter with NDIS3 drivers.
RESOLUTION
You can safely ignore the error message.
STATUS
Microsoft is researching this problem and will post new information here in
the Microsoft Knowledge Base as it becomes available.
MORE INFORMATION
The HP27252 ISA network adapter comes factory-configured to use automatic
detection for the media type. To use NDIS2 drivers with this adapter when
you are using the AUI media type, set the "AUI instead of TP?" setting to
Yes.
| Modification Type: | Major | Last Reviewed: | 12/17/2000 |
|---|
| Keywords: | KB135189 |
|---|
|