CableTron T2015 Token Ring Adapter Fails on 4 Mbps Ring Speed (135172)
The information in this article applies to:
This article was previously published under Q135172 SYMPTOMS
After you install and configure a CableTron T2015 Token Ring network
adapter in a Windows 95-based computer to work with a 4 Mbps Token Ring
network using the T2015.dos NDIS 2 driver, you find that you cannot access
the network after you restart the computer.
CAUSE
Setup places a parameter for ring speed in both the registry and the
Protocol.ini file. The NDIS 2 driver does not read the Protocol.ini file
for this parameter correctly and remains set at the factory-default speed
of 16 Mbps.
RESOLUTION
Use any text editor (such as Notepad) to edit the Protocol.ini file. Change
the line that reads
to read:
After you make this change, save and close the Protocol.ini file, and then
restart your computer.
| Modification Type: | Major | Last Reviewed: | 12/17/2000 |
|---|
| Keywords: | KB135172 |
|---|
|