Setup Hangs Some Racal Modems (135135)


The information in this article applies to:

  • Microsoft Windows 95
This article was previously published under Q135135

SYMPTOMS

When the hardware detection portion of Windows 95 Setup detects a Racal modem, the modem may stop working.

CAUSE

Setup sends an "AT%V" command to the modem. This switches some Racal modems into V.25 mode, causing the modem to stop responding (hang).

RESOLUTION

To reset the modem, turn your computer off and then back on.

To set up a Racal modem, follow these steps:
  1. In Control Panel, double-click the Add New Hardware icon, and then click Next.
  2. Click the No option button, and then click Next.
  3. In the Hardware Types box, click Modem, and then click Next.
  4. Click the "Don't detect my modem; I will select it from a list" check box to select it, and then click Next.
  5. In the Manufacturers box, click Racal. In the Models box, click the appropriate modem, and then click Next.
  6. Click the appropriate communications port, click Next, and then click Finish.
Modification Type:MajorLast Reviewed:12/17/2000
Keywords:KB135135
©2002 Microsoft Corporation. All rights reserved.