How to Install CSNW or GSNW From Floppy Disks (134960)


The information in this article applies to:

  • Microsoft Windows NT Workstation 3.5
  • Microsoft Windows NT Workstation 3.51
  • Microsoft Windows NT Server 3.5
  • Microsoft Windows NT Server 3.51
This article was previously published under Q134960

SUMMARY

This article describes how to create a floppy disk, from the original CD- ROM, to install Client Services for NetWare (CSNW) or Gateway Services for Netware (GSNW).

MORE INFORMATION

The following procedures require that NWLink is installed and configured correctly on the computers that you are going to install CSNW or GSNW on.

Client Services for NetWare

To create a floppy disk to install CSNW:

  1. Create an \i386 subdirectory in the root directory of the floppy disk.
  2. Copy CDROM.W from the root directory of the Windows NT CD-ROM to the root directory of the floppy disk.
  3. Copy the following files from the \i386 directory on the Windows NT Workstation CD-ROM to the \i386 directory on the floppy disk:

    NWRDR.SY_
    NWAPI32.DL_
    NWCFG.DL_
    NETWARE.DR_
    NW16.EX_
    NWAPI16.DL_
    NWC.CP_
    NWDOC.CN_
    NWDOC.HL_
    NWEVENT.DL_
    NWWKS.DL_
    PERFNW.DL_
    VWIPXSPX.DL_
    VWIPXSPX.EX_

To install CSNW from the floppy disk:

  1. Run Control Panel.
  2. Choose Network.
  3. Choose Add Software.
  4. Select Client Services for NetWare and choose OK.
  5. When you are prompted for a path, type the following and then press Enter:

    <drive>:\i386


    where <drive> is the floppy disk drive containing the floppy disk you created.

Gateway Services for Netware

To create a floppy disk to install GSNW:

  1. Create an \i386 subdirectory in the root directory of the floppy disk.
  2. Copy all the files with a .S filename extension from the root directory of the Windows NT Workstation CD-ROM to the root directory of the floppy disk.
  3. Copy the following files from the \i386 directory on the Windows NT Workstation CD-ROM to the \i386 directory on the floppy disk:

    NETWARE.DR_
    NW16.EX_
    NWAPI16.DL_
    NWAPI32.DL_
    NWC.CP_
    NWCFG.DL_
    NWDOCGW.CN_
    NWDOCGW.HL_
    NWEVENT.DL_
    NWRDR.SY_
    NWWKS.DL_
    PERFNW.DL_
    VWIPXSPX.DL_
    VWIPXSPX.EX_

To install GSNW from the floppy disk:

  1. Run Control Panel.
  2. Choose Network.
  3. Choose Add Software.
  4. Select Gateway Services for NetWare and choose OK.
  5. When you are prompted for a path, type the following and then press Enter:

    <drive>:\i386


    where <drive> is the floppy disk drive containing the floppy disk you created.
Modification Type:MajorLast Reviewed:12/16/2003
Keywords:KB134960
©2003 Microsoft Corporation. All rights reserved.