Unable to Set Up New PCMCIA Card on Single-Socket System (134543)
The information in this article applies to:
This article was previously published under Q134543 SYMPTOMS
On a computer with only one PCMCIA socket, Windows 95 cannot set up a new
PCMCIA card if the original PCMCIA card is being used to access the Windows
95 source files.
CAUSE
If you remove the PCMCIA card that is providing access to the Windows 95
source files to set up a new card, Windows 95 cannot access the source
files. When you are prompted to provide the source files, you cannot remove
the new card and insert the original card because Windows 95 does not
detect the removal and insertion of PCMCIA cards during the configuration
of the new card.
RESOLUTION
Use the Add New Hardware Wizard to manually install the new PCMCIA card.
This process preinstalls the necessary driver files, so that you can set up
the new card without accessing the Windows 95 source files.
| Modification Type: | Major | Last Reviewed: | 12/17/2000 |
|---|
| Keywords: | KB134543 |
|---|
|