Setup Does Not Find CD-ROM Drive On HP Vectra Computer (132631)


The information in this article applies to:

  • Microsoft Windows 95
This article was previously published under Q132631

SYMPTOMS

The CD-ROM drive attached to your HP Vectra computer does not function properly within Windows 95 and does not appear in Device Manager. Additionally, an Adaptec SCSI device appears in Device Manager with a yellow exclamation point next to it.

CAUSE

Some HP Vectra computers include a DSP sound card with a built-in Adaptec AID6x60 SCSI chip that is used to control the CD-ROM. The IRQ for this sound card is software configurable and must be set with the /Q: switch in the DEVICE=c:\xxx\DSP16.SYS line in the computer's Config.sys file. If this switch is not present, the Adaptec SCSI chip will not have an IRQ and will not work with the Windows 95 miniport driver for the device.

RESOLUTION

Assign an unused IRQ to the DSP sound card. To do so, follow these steps:
  1. Click the Start button, point to Settings, and then click Control Panel on the menu that appears.
  2. In Control Panel, double-click the System icon, and in the System Properties dialog box, click the Device Manager tab, and then double- click Computer.
  3. In the Computer Properties dialog box, make sure the Interrupt Request (IRQ) button is selected.
  4. Locate an unused IRQ that is supported by the Adaptec SCSI device, and then click the OK button to close the Computer Properties dialog box.
  5. In the System Properties dialog box, double-click the SCSI Controllers icon, select the Adaptec SCSI device, and then click Remove.
  6. Add the /Q:<nn> switch (where <nn> is the unused IRQ you selected) to the DEVICE=C:\xxx\DSP16.SYS line of the Config.sys file, and then restart the computer.
  7. When Windows 95 is running, click the Start button, point to Settings, and then click Control Panel.
  8. In Control Panel, double-click the Add New Hardware icon, and have Windows 95 detect the SCSI device.
After Windows 95 finishes detecting the device, the CD-ROM drive should be functional and should be visible within Device Manager.

MORE INFORMATION

The third-party products discussed here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.
Modification Type:MajorLast Reviewed:12/17/2000
Keywords:KB132631
©2002 Microsoft Corporation. All rights reserved.