3Com 3C619 TokenLink III Driver Does Not Install on ISA System (132477)
The information in this article applies to:
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Server 3.51
This article was previously published under Q132477 SYMPTOMS
The Windows NT 3.51 Hardware Compatibility List (HCL) states that the 3Com
3C619 TokenLink III Adapter is an ISA network adapter. This information is
incomplete. The 3Com 3C619 TokenLink III Adapter can be configured for
either an ISA or EISA bus. The driver for this adapter, located in the
\DRVLIB\NETCARD\{platform}\TLNK3 on the Windows NT 3.51 CD, only supports
EISA based systems. It is listed in the Add Network Adapter list as a "3Com
TokenLink III EISA Adapter."
If you attempt to install this adapter in an ISA based computer, the
following error message appears:
Network card is not present in this system.
CAUSE
The current OEMSETUP.INF and OEMNADZZ.INF files contain entries that
only allow this adapter to function in EISA based computers.
STATUS
Microsoft has confirmed this to be a problem in Windows NT version 3.51.
We are researching this problem and will post new information here in the
Microsoft Knowledge Base as it becomes available.
TokenLink is manufactured by 3Com Corporation. Token Ring is a trademark
of IBM Corporation. These vendors are independent of Microsoft; we make no
warranty, implied or otherwise, regarding this product's performance or
reliability.
| Modification Type: | Major | Last Reviewed: | 10/30/2003 |
|---|
| Keywords: | kb3rdparty kbsetup KB132477 |
|---|
|