Error Message: Vines NDIS Interface Error 1021 (131823)
The information in this article applies to:
This article was previously published under Q131823 SYMPTOMS
When you start Windows 95 with a Banyan Vines network, you may receive the
following error message:
Vines NDIS Interface error: 1021. See NDISBAN.DOC for an error
description.
CAUSE
This error can occur if the correct "Bindings=" setting is not used in the
PROTOCOL.INI file.
RESOLUTION
To correct this problem, use the Banyan Vines PCCONFIG.EXE configuration
utility. For information about using this utility, please refer to your
Banyan Vines documentation, or contact your network administrator or Banyan
Vines Technical Support.
Using PCCONFIG.EXE, modify this setting:
PROTOCOL.INI BINDINGS=
Change the setting to the same value in the "Bindings=<xxxx>" line in the
PROTOCOL.INI file, where <xxxx> is the internal name of the network adapter
driver.
For example, if you are using an Intel EtherExpress network adapter, the
PROTOCOL.INI file contains this entry:
Bindings=EXP16$
In this example, the internal name of the network adapter driver is EXP16$.
MORE INFORMATION
For additional information about Banyan Vines error messages, please see
the NDISBAN.DOC file provided by Banyan Systems.
Banyan Vines is manufactured by Banyan Systems, a vendor independent of
Microsoft; we make no warranty, implied or otherwise, regarding this
product's performance or reliability.
| Modification Type: | Major | Last Reviewed: | 12/17/2000 |
|---|
| Keywords: | KB131823 |
|---|
|