Event ID 5012 When Using S3 864 Video Adapter (131143)


The information in this article applies to:

  • Microsoft Windows NT Workstation 3.51
  • Microsoft Windows NT Workstation 4.0
  • Microsoft Windows NT Server 3.51
  • Microsoft Windows NT Server 4.0
This article was previously published under Q131143

SUMMARY

When you use an S3-864 video adapter with a hardware device, such as an IBM Token Ring 16/4 ISA network interface card (NIC), the NIC may fail and the following event log appears in the system log:
Event ID: 5012
Source: Ibmtok01
Type: Error
Description: The I/O base address supplied does not match the jumpers
on the adapter.

CAUSE

The S3 video adapter is attempting to use the same address range as the hardware device. For example, by default, the S3 video adapter with the 864 chipset uses the RAM address range of C000 to CFFF. The IBM TokenRing 16/4 ISA NIC uses the address range of CC00 to CDFF, by default.

RESOLUTION

To correct this problem, change the RAM address of the hardware device to another address range, such as DC00.
Modification Type:MajorLast Reviewed:8/8/2001
Keywords:kbdisplay kbHardware KB131143
©2002 Microsoft Corporation. All rights reserved.