SNA Server X.25 PVC incoming calls. (128966)
The information in this article applies to:
- Microsoft SNA Server 2.0
- Microsoft SNA Server 2.1
- Microsoft SNA Server 2.11 SP1
- Microsoft SNA Server 2.11 SP2
- Microsoft SNA Server 3.0
- Microsoft SNA Server 3.0 SP1
- Microsoft SNA Server 3.0 SP2
- Microsoft SNA Server 3.0 SP3
- Microsoft SNA Server 4.0
- Microsoft SNA Server 4.0 SP1
This article was previously published under Q128966 SYMPTOMS
If an SNA Server X.25 Permanent Virtual Circuit (PVC) connection is
configured for incoming calls only, the connection is never established.
CAUSE
Outgoing calls should always be configured for PVC connections.
WORKAROUND
To work around this problem, always configure an X.25 PVC connection to
support outgoing calls.
STATUS
| Modification Type: | Minor | Last Reviewed: | 5/17/2005 |
|---|
| Keywords: | KB128966 |
|---|
|