Cannot Change Video Resolution on HP Vectra Computer (128703)


The information in this article applies to:

  • Microsoft Windows 95
This article was previously published under Q128703

SYMPTOMS

When you try to change the video resolution on a Hewlett-Packard (HP) Vectra computer running Windows 95, you receive the following error message:
There is a problem with your display settings. The adapter type is incorrect, or the current settings do not work with your hardware.

CAUSE

HP Vectra computers have on-board VESA local bus video adapters. You must set the video adapter for the correct display mode using the computer's BIOS Setup program.

RESOLUTION

Run the HP Vectra's BIOS Setup program and change the display mode to an appropriate setting for the resolution you want to use.

For information about setting the Vectra's display adapter, please contact Hewlett-Packard.
Modification Type:MajorLast Reviewed:12/17/2000
Keywords:KB128703
©2002 Microsoft Corporation. All rights reserved.