SMSRUN16 Fails to Create SMS Client Group on Installation (128455)


The information in this article applies to:

  • Microsoft Systems Management Server 1.1
This article was previously published under Q128455

SYMPTOM

On your Windows 3.x NetWare client, if NETWARE.DRV and VNETWARE.386 are referred to with a full path in the SYSTEM.INI, SMSRUN16 fails to create the Systems Management Server Client Group during installation.

CAUSE

There is directory path information for VNETWARE.386 and NETWARE.DRV in the SYSTEM.INI file.

WORKAROUND

To work around this problem:

  • Place the NETWARE.DRV and VNETWARE.386 in the \WINDOWS\SYSTEM directory and remove the path information from the "network.drv=" and "network=" lines in the SYSTEM.INI file.

    -or-
  • Follow these steps:
    1. Keep the NETWARE.DRV and VNETWARE.386 in the NWCLIENT directory.
    2. Add the NWCLIENT directory to the path in AUTOEXEC.BAT.
    3. Remove the path information from the "netware.drv=" and "network=" lines in the SYSTEM.INI.

STATUS

Microsoft has confirmed this to be a problem in Systems Management Server version 1.1. A fix to this problem is in development, but has not been regression-tested and may be destabilizing in production environments. Microsoft does not recommend implementing this fix at this time. Contact Microsoft Product Support Services for more information on the availability of this fix.
Modification Type:MinorLast Reviewed:6/14/2005
Keywords:kbnetwork kbsetup KB128455
©2004 Microsoft Corporation. All rights reserved.