PC DB: Err Msg: Not Find Mail System Data Files on Drive M (128357)
The information in this article applies to:
- Microsoft Mail for PC Networks 3.2
- Microsoft Mail for PC Networks 3.2a
This article was previously published under Q128357 SYMPTOMS
When you start the Administration program (ADMIN.EXE) for Microsoft Mail
for PC Networks, the following message may be received:
Could Not Find Mail System Data Files on Drive M:
CAUSE
This may be caused if ADMIN.EXE cannot open the MODEM.GLB with READ/WRITE
access.
When ADMIN.EXE launches, it tries to open the MODEM.GLB with READ/WRITE
access. If this fails, either due to corruption or the READ-ONLY attribute
having been applied, ADMIN.EXE will fail to start, returning the above
error.
RESOLUTION
If this should occur, either remove the READ-ONLY attribute, or remove the
file.
A new MODEM.GLB can be created by doing the following:
- Delete MODEM.GLB
- Restart ADMIN.EXE
A MODEM.GLB will be recreated automatically.
- Because the new MODEM.GLB may not have the correct settings, select
Config, Serial in ADMIN.EXE to set the baud rate, comm prt, and dial
type.
Modification Type: | Major | Last Reviewed: | 11/5/1999 |
---|
Keywords: | KB128357 |
---|
|