PC WRmt: MCI Credit Card Calling /Modem Script (128323)

MORE INFORMATION

CALL:

; BEGIN HERE

      $ret = 8               ; set default ret code to "no answer"

      clearrsp               ; clear the response buffer

      echo 0                 ; do not display phone number

; If this script is specified in the phone number field then the
; initialize script in the default script file may have turned off the
; speaker.  The following commands will turn the speaker back on for
; Hayes compatible modems:
;
      sendln "ATM1"           ; turn speaker on
      waitrsp 1               ; get the response back from the modem

; In order to make credit card dialing work, the modem being used must
; support the ";" dial modifier.  This character returns the modem to
; command state after the dial string is sent, allowing us to proceed
; with further processing.  The operator is prompted to press a key.
; When he does, send another dial string.  This time the dial string is
; the credit card number.
; Remember that the phone number must be in the form:
;               0 - area code - number

      ; standard number to call to get into MCI
      sendln "ATD" + dial_mode + "9,1,8009501022;"

      ; turn echo back on
      echo 1

      display 'Press any key when you hear the tone...'

; Wait until a key is struck

operator_wait_loop:
      getkey
      if (key = 0)
        goto operator_wait_loop

; Now send the phone number of external and the credit card number.
; ### = phone number to call, should be EXTERNAL.EXE number
; $$$ = credit card number.
; You will have to replace this with your credit card number.

      ; do not display credit card number
      echo 0

      sendln "ATD" + dial_mode + "0,##########,,$$$$$$$$$$$$$$"

      ; echo back on to see response
      echo 1

      ; should get "OK" from modem
      waitrsp 2
      if (response != "0^M")
            return $ret

      ; wait until the modem responds (max 2 minutes)
      waitrsp 120
; STOP HERE

   if (response = "1^M")
      {
      display ">>> CONNECT 300 <<<"
      $ret = 1
      }
   else if (response = "3^M")
      {
      display ">>> NO CARRIER <<<"
      $ret = 3
      }
   else if(response = "4^M")
      {
      display ">>> ERROR <<<"
      $ret = 4
      }
   else if (response = "5^M")
      {
      display ">>> CONNECT 1200 <<<"
      $ret = 5
      }
   else if (response = "6^M")
      {
      display ">>> NO DIALTONE <<<"
      $ret = 6
      }
   else if (response = "7^M")
      {
      display ">>> BUSY <<<"
      $ret = 7
      }
   else if(response = "8^M")
      {
      display ">>> NO ANSWER <<<"
      }
   else if (response = "10^M")
      {
      display ">>> CONNECT 2400 <<<"
      $ret = 10
      }
   else if (response = "13^M")
      {
      display ">>> CONNECT 9600 <<<"
      $ret = 12
      }
   else if (response = "14^M")
      {
      display ">>> CONNECT unknown/ARQ <<<"
      $ret = 12
      }
   else if (response = "15^M")
      {
      display ">>> CONNECT 1200/ARQ <<<"
      $ret = 5
      }
   else if (response = "16^M")
      {
      display ">>> CONNECT 2400/ARQ <<<"
      $ret = 10
      }
   else if (response = "17^M")
      {
      display ">>> CONNECT 9600/ARQ <<<"
      $ret = 12
      }
   else if (response = "18^M")
      {
      display ">>> CONNECT 4800 <<<"
      $ret = 11
      }
   else if (response = "19^M")
      {
      display ">>> CONNECT 4800/ARQ <<<"
      $ret = 11
      }
   else if(response = "20^M")
      {
      display ">>> CONNECT 7200 <<<"
      $ret = 12
      }
   else if(response = "21^M")
      {
      display ">>> CONNECT 12000 <<<"
      $ret = 14
      }
   else if (response = "22^M")
      {
      display ">>> CONNECT 12000/ARQ <<<"
      $ret = 14
      }
   else if (response = "24^M")
      {
      display ">>> CONNECT 7200/ARQ <<<"
      $ret = 12
      }
   else if(response = "25^M")
      {
      display ">>> CONNECT 14400 <<<"
      $ret = 14
      }
   else if (response = "26^M")
      {
      display ">>> CONNECT 14400/ARQ <<<"
      $ret = 14
      }
   else
      {
      display ">>> CONNECT FAILED <<<"
      }
   return $ret