Windows NT Hangs During Network File Copy with 3C679 (128249)
The information in this article applies to:
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Server 3.5
This article was previously published under Q128249 SYMPTOMS
When you copy files to a Hewlett-Packard (HP) NetServer computer using a
3Com 3C679 network interface card (NIC) with an 8-bit IBMTOK.SYS driver,
Windows NT 3.5 may stop responding (hang) or the copied files may become
corrupted. The NIC is not on the Windows NT 3.5 Hardware Compatibility List
(HCL).
WORKAROUND
To work around this problem, run the EISA Configuration utility for the
computer and set the NIC data path width value to 8 bits. The default value
is 32 bits.
The products discussed here are manufactured by vendors independent of
Microsoft; we make no warranty, implied or otherwise, regarding these
products' performance or reliability.
| Modification Type: | Major | Last Reviewed: | 11/3/2003 |
|---|
| Keywords: | KB128249 |
|---|
|