X400: Sample TP4 Configuration Files (127729)

SUMMARY

The following are examples of the AUTOEXEC.BAT, CONFIG.SYS, and PROTOCOL.INI files for an X.400 gateway using TP4 as the transport stack. It is assumed that the gateway computer has a DEC DEPCA Ethernet card in it.

AUTOEXEC.BAT

Prompt $p$g
Echo Off
set path =c:\dos
set tmp =c:\tmp
 
lh doskey
lh mouse
 
@REM ==== LANMAN 2.2a ====
SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
c:\tp4\drivers\tp4.exe
NET START workstation full
LOAD NETBEUI
NET LOGON
@REM ==== LANMAN 2.2a ====
				

CONFIG.SYS

device=c:\dos\himem.sys /testmem:off
device=c:\dos\emm386.exe noems /x=D000-DFFF
dos=high,umb
files=30
shell=c:\dos\command.com c:\dos\ /p
 
LASTDRIVE=Z
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\DEPCA\DEPCA.DOS
device=c:\tp4\drivers\dli.dos
				

PROTOCOL.INI

[PROTMAN]
  DRIVERNAME = PROTMAN$
  DYNAMIC = YES
  PRIORITY = NETBEUI
 
[CLNS]
  DRIVERNAME = CLNS$
  NTC        = 6
 
[PLUTO]
  DRIVERNAME = PLUTO$
  BINDINGS   = "DEPCA_NIF"
  NBUF       = 4
  NTC        = 7
 
[NETBEUI_XIF]
  Drivername = netbeui$
  SESSIONS = 6
  NCBS = 12
  BINDINGS = "DEPCA_NIF"
  LANABASE = 0
 
[DEPCA_NIF]
 
; PROTOCOL.INI section for the DEC EtherWORKS (MC, LC, Turbo, & DEPCA)
; Adapters

    DriverName   = DEPCA$
    MaxMulticast = 12
    MaxTransmits = 32
    AdapterName  = DE200
    RamAddress   = 0xD000
    Interrupt    = 5
 
;  use Interrupt = 5 for turbo board