Default Data Type RAW (FF Auto) Does Not Work Properly (125318)
The information in this article applies to:
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Server 3.5
This article was previously published under Q125318 SYMPTOMS
When you set the Data Type to either FF Auto or FF Appended, you receive
an extra page when you print. This usually occurs when you print from MS-
DOS-based applications such as Word Perfect and Lotus 1-2-3.
STATUS
Microsoft has confirmed this to be a problem in Windows NT version
A supported fix is now available, but is not fully regression-tested and
should be applied only to systems experiencing this specific problem.
Unless you are severely impacted by this specific problem, Microsoft
recommends that you wait for the service pack release containing this fix.
Contact Microsoft Product Support Services for more information. Microsoft
does not recommend implementing this fix at
this time. Contact Microsoft Product Support Services for more
information on the availability of this fix.
MORE INFORMATION
Under Windows NT version 3.5, you can set the default data type for a print
queue to Raw (FF Auto) or RAW (FF Appended). When you choose RAW (FF Auto),
Windows NT adds the appropriate command to produce a form feed at the end
of the print job, unless Windows NT detects that a form feed command is
already at the end of the print job. When you select RAW (FF Appended),
Windows NT adds the appropriate command to produce a form feed at the end
of the job.
| Modification Type: | Major | Last Reviewed: | 11/4/2003 |
|---|
| Keywords: | KB125318 |
|---|
|