Running Windows NT 3.5 on a ASUSTECH Dual Pentium Computer (124119)


The information in this article applies to:

  • Microsoft Windows NT Workstation 3.5
  • Microsoft Windows NT Server 3.5
This article was previously published under Q124119

SUMMARY

This article describes the hardware required to run Windows NT 3.5 on ASUSTECH (ASUS) dual Pentium computer.

MORE INFORMATION

This configuration, in accordance with the Intel SMP 1.0 specification, requires that the second Pentium chip be designed to be used as a second processor. You cannot use two primary Pentium chips. If you purchased the computer with only one Pentium chip and you plan to obtain a second processor, check with the manufacturer for availability. If you have the two Pentium chips properly installed, the BIOS reports "Number of processors 2" when you start the computer.

This configuration also requires an Award BIOS revision level 0303 or later. Check the CMOS setup to determine your version.



The third-party products discussed here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.
Modification Type:MajorLast Reviewed:11/4/2003
Keywords:KB124119
©2003 Microsoft Corporation. All rights reserved.