How To Set Up ODBC Data Sources When Distributing Apps (123008)


The information in this article applies to:

  • Microsoft Visual Basic Professional Edition, 16-bit, for Windows 4.0
  • Microsoft Visual Basic Professional Edition, 32-bit, for Windows 4.0
  • Microsoft Visual Basic Enterprise Edition, 16-bit, for Windows 4.0
  • Microsoft Visual Basic Enterprise Edition, 32-bit, for Windows 4.0
  • Microsoft Visual Basic Professional Edition for Windows 3.0
This article was previously published under Q123008

SUMMARY

This article discusses the following four methods for setting up an ODBC data source on a computer:
  • ODBC Setup
  • RegisterDatabase
  • ODBC API
  • Blind Copy of INI files

MORE INFORMATION

Required Files

The following files must be distributed with your application if you use ODBC. When using the Setup Wizard to create distribution disks, ensure that the necessary files are included in the file list. All of the files listed should be installed in the \WINDOWS\SYSTEM directory.

Optional files (SQL Server or Oracle) are denoted with an asterisk (*). 
File                  Description
----------------------------------------------------------------------
ODBC.DLL              The ODBC Driver Manager. This DLL is called by the
                      Microsoft Jet database engine when performing ODBC
                      operations. The Driver Manager handles loading the
                      correct ODBC driver and dispatching ODBC function
                      calls to the driver.

ODBCINST.DLL          The ODBC Driver Installation library. This DLL
                      contains Driver installation specific functions.
                      The ODBC Administrator (ODBCADM.EXE) calls functions
                      exported from this DLL when installing ODBC
                      drivers. You may also call functions in this DLL
                      to automate driver installation.

ODBCADM.EXE           The ODBC Administrator program. This program
                      allows a user to install ODBC drivers and
                      set up or modify Data Sources.

ODBCINST.HLP          The ODBC Administrator help file.

COMMDLG.DLL           The Common Dialog DLL. This DLL is used by the
                      ODBC Administrator program.

CTL3D.DLL             The 3D Control DLL. This DLL is used by the ODBC
                      Administrator program. If you are using ODBC.DLL
                      version 1.05 or greater, you need to distribute
                      CTL3DV2.DLL.

PDSODBC.DLL           Crystal Reports Physical Server DLL for ODBC. This
                      DLL is required only if your application uses Crystal
                      Reports to access an ODBC data source.

<driver>.DLL          The ODBC driver(s) that the application will use
                      to connect to specific Data Sources.

                      SQL Server:  SQLSRVR.DLL*
                      Oracle 6:    SQORA.DLL*

<netlib>.DLL          The network library file(s). This file is used
                      to access the Data Source when using a specific
                      network protocol.

                      Named Pipes: DBNMP3.DLL*
                      TCP/IP (Sybase SQL Server): WDBNOVTC.DLL*
                      IPX/SPX (Sybase SQL Server): WDBNOVSP.DLL*
                      SQL*Net Interface: ORA6WIN.DLL*

INSTCAT.SQL*          SQL Server Catalog Stored Procedures script.

DRVSSRVR.HLP*         SQL Server ODBC Driver help file.

ORASETUP.DLL*         Oracle ODBC Driver setup functions.

DRVORACL.HLP*         Oracle ODBC Driver help file.

ORACLE.TXT*           Oracle ODBC Setup "read me" file.

ODBC.INI              Initialization file containing information
                      about specific Data Sources. The DSN parameter
                      in the Connect property of the data control or
                      the OpenDatabase statement corresponds to an
                      entry in the ODBC.INI. This file must also be
                      created or modified on the client computer.

ODBCINST.INI          The Initialization file that contains
                      information about installed ODBC drivers. The
                      RegisterDatabase statement and ODBC Administrator
                      use the information contained in this file to
                      set up Data Sources. Entries in ODBCINST.INI
                      are created either by running an ODBC driver
                      setup or through the ODBC API. This file must
                      also be either created or modified on the client
                      computer.

Four Methods to Get DSN information into ODBC.INI and ODBCINST.INI

The .INI files store information about the ODBC driver(s) and the ODBC Data Sources. As a result, they are variable -- a user's may already have them installed in the \WINDOWS directory. If a developer were to blindly copy ODBC.INI and ODBCINST.INI onto the user's computer, the new files may overwrite existing Data Sources.

Below are four methods you can use to get DSN information into the user's ODBC.INI and ODBCINST.INI files.

ODBC Setup

To install an ODBC Driver and establish an ODBC Data Source, the Visual Basic online Help documentation recommends that you copy the entire contents of the \VB\ODBC directory to an additional distribution disk.

As a developer, you can specify that the disk be inserted and SETUP.EXE run from the floppy disk. In addition, you can prompt the user to insert the ODBC floppy disk, and then use the Visual Basic Shell command to shell out to SETUP.EXE.

The Setup Wizard copies and modifies SETUP1.MAK into SETUP1A.MAK during the process of creating distribution disks. It builds SETUP1A.MAK into SETUP1.EXE, compresses it, and copies it to the distribution disks. When SETUP.EXE is executed on the distribution disks, the files in SETUP.LST are copied to the destination computer. SETUP1.EX_ is then uncompressed and executed to start copying files from the floppy disks to the destination computer.

It is possible to then modify SETUP1A.MAK, rebuild SETUP1.EXE, compress it, and copy it to the distribution disks. To ensure that the compressed file size will fit on the first distribution disk, you must pad the project with code prior to first executing the Setup Wizard. Then you can change the code into comments and add new code to prompt for the ODBC Setup disk. The resulting EXE size will then still fit on the first distribution floppy disk.

Modify SETUP1.FRM in the \VB\SETUPKIT\SETUP1 directory to add the necessary code to pad the executable. This file is copied into SETUP1A.MAK during the Setup Wizard's execution.

NOTE: Microsoft Technical Support does not support the modification of the Setup process or any of the setup files. Support is provided for the Setup Wizard and the files it creates on an "as is" basis only.

Here are the steps to follow:

  1. Start Visual Basic and from the File menu, choose Open Project. Open SETUP1.MAK in the \VB\SETUPKIT\SETUP directory.
  2. Select SETUP1.FRM from the project window. Press F7 to view the code.
  3. At the end of the Form_Load procedure add the following code in the ExitSub: label part, after RestoreProgMan and before the End statement:
          Dim tmpK As String
      Dim tmpS As String
      Dim I As Long
      tmpK = "dummy"
      For I = 1 To 1000
         tmpS = Mid$(tmpK, 1, 2)
         tmpS = Mid$(tmpK, 1, 2)
         tmpS = Mid$(tmpK, 1, 2)
         tmpS = Mid$(tmpK, 1, 2)
         tmpS = Mid$(tmpK, 1, 2)
         tmpS = Mid$(tmpK, 1, 2)
         tmpS = Mid$(tmpK, 1, 2)
         tmpS = Mid$(tmpK, 1, 2)
         tmpS = Mid$(tmpK, 1, 2)
         tmpS = Mid$(tmpK, 1, 2)
         tmpS = Mid$(tmpK, 1, 2)
         tmpS = Mid$(tmpK, 1, 2)
         tmpS = Mid$(tmpK, 1, 2)
         tmpS = Mid$(tmpK, 1, 2)
         tmpS = Mid$(tmpK, 1, 2)
         tmpS = Mid$(tmpK, 1, 2)
         tmpS = Mid$(tmpK, 1, 2)
         tmpS = Mid$(tmpK, 1, 2)
         tmpS = Mid$(tmpK, 1, 2)
         tmpS = Mid$(tmpK, 1, 2)
      Next I
  4. Save the project (ALT, F, V).
  5. Run the Setup Wizard, and create the distribution disks.
Once the disks have been created, you need to go back into Visual Basic, edit SETUP1A.MAK, and add the appropriate code to prompt for the ODBC Setup And Installation Disk. Follow these steps:

  1. Start Visual Basic.
  2. Open the SETUP1A.MAK project in \VB\SETUPKIT\SETUP1 (ALT, F, O).
  3. Choose SETUP1A.FRM and press F7 to view the code.
  4. In the Form_Load procedure, place an apostrophe in front of each line of the dummy code that was previously inserted as a place holder:
          'Dim tmpK As String
      'Dim tmpS As String
      'Dim I As Long
      'tmpK = "dummy"
      'For I = 1 To 1000
      '   tmpS = Mid$(tmpK, 1, 2)
      '   tmpS = Mid$(tmpK, 1, 2)
      '   tmpS = Mid$(tmpK, 1, 2)
      '   tmpS = Mid$(tmpK, 1, 2)
      '   tmpS = Mid$(tmpK, 1, 2)
      '   tmpS = Mid$(tmpK, 1, 2)
      '   tmpS = Mid$(tmpK, 1, 2)
      '   tmpS = Mid$(tmpK, 1, 2)
      '   tmpS = Mid$(tmpK, 1, 2)
      '   tmpS = Mid$(tmpK, 1, 2)
      '   tmpS = Mid$(tmpK, 1, 2)
      '   tmpS = Mid$(tmpK, 1, 2)
      '   tmpS = Mid$(tmpK, 1, 2)
      '   tmpS = Mid$(tmpK, 1, 2)
      '   tmpS = Mid$(tmpK, 1, 2)
      '   tmpS = Mid$(tmpK, 1, 2)
      '   tmpS = Mid$(tmpK, 1, 2)
      '   tmpS = Mid$(tmpK, 1, 2)
      '   tmpS = Mid$(tmpK, 1, 2)
      '   tmpS = Mid$(tmpK, 1, 2)
      'Next I
  5. Add the following code within the Form_Load procedure immediately following the commented code:
          x% = MsgBox("Do you want to install the ODBC Drivers?", 36,
         App.title)
      If x% = 6 Then
         If Not PromptForNextDisk(2, SourcePath$ + "ODBCADM.EX_") Then
            GoTo ErrorSetup
         End If
         x% = Shell(SourcePath$ &amp; "setup.exe")
      End If
  6. Change the disk number to 1 greater than the total number of distribution disks created. The disk number is the first parameter to the PromptForNextDisk procedure. In this example, the next disk to prompt for is 2.
  7. Save the SETUP1A.MAK project and create the executable as SETUP1.EXE in the \VB\SETUPKIT\SETUP1 directory (ALT, F, K).
  8. Shell out to an MS-DOS command prompt and change the directory to \VB\SETUPKIT\SETUP1. Execute the following at the command prompt:

    \VB\SETUPKIT\KITFILES\COMPRESS -r SETUP1.EXE

  9. Place the first distribution floppy disk in the appropriate drive and copy SETUP1.EX_ to the floppy disk:

    copy SETUP1.EX_ A:\SETUP1.EX_

Now, when your distribution disks are run, the final step will be to prompt for the ODBC Setup and Installation disk. SETUP.EXE will be executed from this disk and the user can then install the appropriate ODBC driver and create the necessary Data Source. You should include instructions for this process.

For more information on modifying SETUP1.EXE please refer to Chapter 25, "Distributing Your Application" in the Microsoft Visual Basic Programmer's Guide.

RegisterDatabase

Visual Basic provides the RegisterDatabase statement to help in installing ODBC data sources, not drivers. The RegisterDatabase statement assumes that ODBCINST.INI and ODBCINST.DLL already exist on the computer. That is, the drivers must be installed before running RegisterDatabase. If so, the developer can use RegisterDatabase to add or update an entry in the ODBC.INI.

The problem with this method is that if the client computer does not have ODBC installed on the computer, the ODBCINST.INI and DLL will not exist. Also, if the ODBC driver is new to the computer, there will not be an entry for it in ODBCINST.INI, so RegisterDatabase will fail then as well.

The following description, syntax, remarks, and example about the RegisterDatabase statement come from the Visual Basic online Help:

Description:

Makes connect information for an ODBC data source name available for use by the OpenDatabase function.

Syntax:

RegisterDatabase dsn, driver, silent, attributes

Remarks: The RegisterDatabase statement has the following parts:

  • DSN: A string expression that is a name used in the OpenDatabase function and refers a block of descriptive information about the data source. For example, if the data source is an ODBC remote database, it would be the name of the server.
  • DRIVER: A string expression that is the name of the ODBC driver. This is not the name of the ODBC driver DLL file. For example, "SQL Server" or "Oracle" are driver name but "SQLSRVR.DLL" is the name of a DLL file. You must have ODBC and the appropriate driver already installed.
  • SILENT: A numeric expression that is True if you do not want to display the ODBC driver dialogs that prompt for driver-specific information, or False if you do want to display the ODBC driver dialogs. If silent is True, then attributes must contain all the necessary driver-specific information or the dialog will appear anyway.
  • ATTRIBUTES: String expression that is a list of keywords to be added to the ODBC.INI file. The keywords are in a carriage-return delimited string.
Example: 
      Sub Command1_Click ()
         Dim att As String
         Dim mydb As Database

         att = "Description = SQL Server on server Texas" & Chr$(13)
         att = att & "OemToAnsi=No" & Chr$(13)   ' Build keywords string.
         att = att & "Server=TEXAS" & Chr$(13)
         att = att & "Network=DBNMP3" & Chr$(13)
         att = att & "Address=\\TEXAS\PIPE\SQL\QUERY" & Chr$(13)
         att = att & "Database=Pubs" & Chr$(13)
         att = att & "LastUser=Stimpy"

         ' Update ODBC.INI.
         RegisterDatabase "Texas", "SQL Server", True, att

         Set mydb = OpenDatabase("Texas", False, False, "ODBC;")
         mydb.Close

      End Sub
If the database is already registered in the ODBC.INI file, the entry is updated. If RegisterDatabase fails for any reason, no changes are made to the ODBC.INI file and an error occurs.

ODBC API

This is probably the most flexible and most efficient method, but most developers are not familiar with it and do not have the ODBC SDK that documents the API. Developers should get the Microsoft Software Development Kit (SDK) and get the "Microsoft ODBC 2.0 Programmer's Reference and SDK Guide" from Microsoft Press.

Copy INI

If the developer is certain that an ODBC.INI and ODBCINST.INI do not exist on the installation computer, they can simply copy the files. However, the developer must ensure that the paths to the drivers are correct; paths are fully qualified within the .INI files. For example, the ODBC.INI file will specify C:\WINDOWS\SYSTEM\SQLSRVR.DLL as the driver for SQL Server, so if the user's Windows setup is in \WIN31, the path won't work.
Modification Type:MinorLast Reviewed:7/13/2004
Keywords:kbDatabase kbhowto KB123008 kbAudDeveloper
©2004 Microsoft Corporation. All rights reserved.