Event Viewer Messages for the Olicom Network Card (122933)

MORE INFORMATION

Event    Description

  1      Bring-up diagnostics failed for OcTk1601.

   Action: The adapter failed during the bring-up diagnostics. Shut down
      your system and retry the operation. If the error persists, contact
      your place of purchase.

  2      Adapter initialize failed for OcTk1601.

   Action: The adapter failed the initialization phase. Shut down your
      system and retry the operation. If the error persists, contact your
      place of purchase.

  3      Adapter Check on OcTk1601.

   Action: A serious error occurred on the adapter, causing an Adapter
      check code to be posted. Restart your system. If the error persists,
      contact your place of purchase.

  4      Could not open adapter OcTk1601. Ring beaconing. Check network
         speed settings.

   Action: The network speed settings is wrong. Change it and restart your
      system.

  5      Could not open adapter OcTk1601. Duplicate node address.

   Action: A duplicate address has been discovered on the ring. Change your
      locally administered address and restart your system.

  6      Could not open adapter OcTk1601. Request initialisation failed.

   Action: An error occurred during adapter initialisation. Restart your
      system. If the error persists, contact your place of purchase.

  7      Could not open adapter OcTk601. Remove station received.

   Action: The adapter has been removed by a LAN Manager station. Contact
      your network administrator.

  8      Could not open adapter OcTk1601.

   Action: The adapter failed to open. Please check cables and connections
      and retry the operation.

  9      Could not download code on adapter OcTk1601.

   Action: The download operation failed. Contact your place of purchase.
 10      Lobe wire fault detected by OcTk1601. Please check cable
         connections.

   Action: Check all cables and connections and try another lobe media
      cable. Retry the operation.

 11      OcTk1601 has failed the lobe wrap test resulting from the beacon
         auto-removal process and has deinserted from the ring.

   Action: The adapter has deinserted from the ring, because the ring was
      beaconing. Check the network speed settings and cable connections and
      retry the operation. If the persists, contact your network
      administrator.

 12      OcTk1601 has received a remove ring station Mac frame request and
         has deinserted from the ring.

   Action: The adapter has been removed by a LAN Manager station. Contact
      your network administrator.

 13      The detected adapter for OcTk1601 is not supported by this driver.

   Action: You have installed a wrong MAC driver for the adapter used.

 14      The configuration read for OcTk1601 is invalid.

   Action: A configuration entry is invalid. Use the network control panel
      to setup proper adapter settings.

 15      OcTk1601 has received a Trace Tool Remove frame from a Network
         Management station and has disabled the packet filter.

   Action: The adapter driver has cleared the PROMISCUOUS packetfilter bit,
      as instructed by a LAN Manager station. Contact your network
      administrator.

 5000    OcTk1601 : Has encountered a conflict in resources and could not
         load.

   Action: Check the resources used by the network adapter(s) ensure, that
      no conflicts exists.

 5001    OcTk1601 : Could not allocate resources necessary operation.

   Action: The driver failed to load, because it tried to allocate too many
      resources. Decrease the number of receive and/or transmit buffers and
      retry the operation.

 5002    OcTk1601 : Has determined that the adapter is not functioning
         properly.

   Action: The adapter could not be found or is not properly. Check I/O
      base settings and retry the operation.

 5003    OcTk1601 : Could not find an adapter.

   Action: The adapter could not be found by the MAC driver. Check I/O base
      settings and retry the operation.

 5004   OcTk1601 : Could not connect to the interrupt number.

   Action: The interrupt is already used by another device. Change the
      adapter interrupt number and retry the operation.

 5005    OcTk1601 : Has encountered an internal error and has failed.

   Action: An internal error has been discovered. Contact your place of
      purchase.

 5006    OcTk1601 : The version number is incorrect for this driver.

   Action: The driver version is incorrect. Contact your placeof purchase.

 5007    OcTk1601 : Timed out during an operation.

   Action: A time-out error occurred. Contact your place of purchase.

 5008    OcTk1601 : Has encountered an invalid network address.

   Action: An invalid network address was specified. Change the locally
      administered network address and restart your system.The driver uses
      the burned-in address when loading.

 5009    OcTk1601 : Does not support the configuration supplied.

   Action: An invalid configuration entry was discovered. Use the network
      control panel to set proper adapter parameters.

 5010    OcTk1601 : The adapter has returned an invalid value to the
         driver.

   Action: An internal error has occurred. Contact your place of purchase.

 5011    OcTk1601 : A required parameter is missing from the Registry.

   Action: A parameter necessary for operation has been omitted in the
      Registry. Use the network control panel to set properparameters.

 5012    OcTk1601 : The IO Base Address supplied does not match the jumpers
         on the adapter.

   Action: The adapter could not be found by the MAC driver. Check I/O base
      settings and retry the operation.

 5014    OcTk1601 : The adapter is disabled. The driver cannot open the
         adapter.

   Action: Make sure the startup parameter for the Olicom Token Ring
      adapter driver is set to "Manual". Use the "Devices" applet in the
      control panel to change the settings.

 5015    OcTk1601 : There is an I/O port conflict.

   Action: The ports used by the MAC driver is already in use by another
      device. Change the I/O Base address for the adapter.

 5016    OcTk1601 : There is an I/O port or DMA channel conflict.

   Action: Check the I/O port and DMA usage by the adapter to ensure that
      there is no resource conflicts.

 5017    OcTk1601 : There is a memory conflict at address xx.

   Action: The MAC driver and another device could not share memory.

 5018    OcTk1601 : There is a interrupt conflict at interrupt number xx.

   Action: Change the interrupt selection on the adapter and retry the
      operation.

 5019    OcTk1601 : There is a resource conflict at DMA channel xx.

   Action: Change the DMA channel selection on the adapter andretry the
      operation.