PC DOS: How to Use One-Off Addressing (119560)


The information in this article applies to:

  • Microsoft Mail for PC Networks 3.0b, when used with:
    • the operating system: MS-DOS
This article was previously published under Q119560

SUMMARY

In version 3.0b of the Microsoft Mail for PC Networks MS-DOS client, you can type an external postoffice or gateway address directly in the To or Cc line, although some directory traversing is required. This is called one- off addressing. You can use one-off addressing by traversing the address lists and pressing the INSERT key when the address list you require is displayed.

For example, to use one-off addressing for a PROFS address perform the following steps:
  1. Select Compose, To.
  2. Press the LEFT ARROW key to display the available address lists.
  3. Choose PROFS, then choose the Node. The available addresses will be displayed.

    You can now press the INSERT key and type in the VM ID to which you want to send mail.
To use one-off addressing for an external postoffice address, perform the following steps:
  1. Select Compose, To.
  2. Press the LEFT ARROW key to display the available address lists.
  3. Choose Postoffice Network List, then choose the network and postoffice. The available addresses will be displayed.

    You can now press the INSERT key and type in the mailbox to which you want to send mail.
Modification Type:MajorLast Reviewed:10/19/2000
Keywords:KB119560
©2002 Microsoft Corporation. All rights reserved.