MORE INFORMATION
Program: APPLICATION GET
Syntax: APPGET [-imailbox:password output-filename [-ddrive]
[-f0|1|2] [-h] [-k] [-ms] [-nvalue] [-pvalue]
[-wydirectory|-wndirectory log-filename]
[-yyy|-yyn|-yny|ynn]
[-zey|-zeny|-zeyn|zdmsgid|zrmsgid]]|-ver
Options:
-imailbox:password
Use the -i option to specify the user mailbox and password for the
application. This identification is assigned by the administrator.
Example: -ijjones:star
output-filename
Use this to specify the file to contain the messages exported from
Mail. Example: c:mail\data\out
-ddrive
Use the -d option to specify the drive that contains the Mail data
files. If you not specify a drive, FFAPI searches for the files on
drive m. Example: -dl
-f0|1|2
Use the -f option to specify the new-line sequence to be used in the
MMFF output file:
0 = carriage return
1 = line feed
2 = carriage return, line feed
If you do not specify the new-line sequence, carriage return is used.
Example: -f2
-h
Use the -h option to generate messages in the extended message format.
Example: -h
-k
Use the -k option to keep messages in the postoffice mailbag. This
includes the MMFF input file, and all data files that make up the message.
Example: -k
-ms
Use the -ms option to generate a log of messages sent. This is put in
the file: \log\sent.log located on the drive specified for the Mail
data files (-d option). If the file already exists, the new messages
are appended to it. Example: -ms
-nvalue
Use -n to specify the number of messages to get from the Mail data file
and place in the MMFF output file. The number must be greater than zero and
not more than 50. If you do not specify a number, up to 50 messages are
retrieved. Example: -n20
-pvalue
Use -p to extract messages with a priority equal to or higher than the
one you specify. The ASCII character set determines the order of
priority. Priorities 1 to 5 and R, C, F, and T are reserved for Mail.
If you don't specify a priority, all messages are extracted.
Values: 1 - 9 or any letter. Example: -p3
-wydirectory|-wndirectory
Use -w to automatically save files sent to the user using file transfer.
Use this option to indicate what to do with duplicate file names and to
specify the directory to contain the files.
Use -wy to overwrite an existing file if the file received has the
same name.
Use -wn to automatically change the name of the file received if an
existing file has the same name.
Save all files received in the directory you specify.
Example: -wnc:\inbox
log-filename
Use this option to specify the path and filename to contain the audit
of files received. Example: c:\mail\receive.log
-yyy|-yyn|-yny|-ynn
Use a -y option to create external files for the message body, attachments,
or both.
Use -yyy to create external files for the attachments and the message
body. Yy means create the files for the message body; the last y means
create files for the attachments.
Use -yyn to create external files for the message body. Yy means
generate the files for the message body; n means do not generate files
for the attachment.
Use -yny to create external files for the attachments. Yn means do not
generate files for the message body; the second y means generate files
for the attachments.
If you specify -ynn, the messages along with any associated attachment
files are put in the MMFF output file. If you do not specify this option,
AppGet uses -ynn . Example: -yny
-zeyy|-zeny|-zeyn|-zdmsgid|-zrmsgid
Use a -z option to manipulate individual message headings in the mailbag.
You can read message headings, get a message or delete a message. To
enumerate the headings of the messages in the mailbag, specify -zeyy. The
first y means extract headings of unread messages; the second y means
extract headings of messages that have been read.
To extract only headings of messages that have been read, specify -zeny.
N means do not extract the headings of unread messages; y means extract
headings of messages that have been read.
To extract only headings of unread messages, specify -zeyn. Y means
extract the headings of unread messages; n means do not extract headings
of messages that have been read.
To get a message and place it in the output file, specify -zrmsgid, where
the message identification is the mail identifier.
To delete a message in the mailbag, specify -zdmsgid, where the message
identification is the mail identifier. Example: -zd0000008a
-ver
Use -ver to display the version of this FFAPI program. The version number
appears on the screen, unless you direct it to another location.
Example: -ver
Program: APPLICATION PUT
Syntax: APPPUT [-imailbox:password input-file [-bffilename]
[-ddrive] [-f0|1|2] [-j] [-k] [-mr] [-wuser-address
[,user-address] physical-filename [ physical-filename]
|-wuser-address [,user-address] physical-filename,
logical-filename [ physical-filename,
logical-filename] ] [-x] ]|-ver
Options:
-imailbox:password
Use -i to specify the user mailbox and password for this application.
This identification is assigned by the administrator.
Example: -ijjones:star
input-filename
Use this to specify the file that contains the messages to be imported
into Mail. Example: c:\mail\data.in
-bffilename
Use -bf to log all error messages in a file you specify. If you omit the
file, errors are directed to standard output. Example: -bfc:\errors\err.log
-ddrive
Use -d to specify the drive that contains the Mail data files. If you
do not specify a drive, FFAPI searches for the files on drive m.
Example: -dl
-f0|1|2
Use -f to specify the new-line sequence used in the MMFF input file:
0 = carriage return
1 = line feed
2 = carriage return, line feed
If you do not specify the new line sequence, carriage return is used.
Example: -f2
-k
Use -k to keep message in the postoffice mailbag. This includes the MMFF
input file, and all data files that make up the message.
Example: -k
-mr
Use -mr to generate a log of messages received. This log is placed in
the file: \LOG\RECV.LOG located on the drive specified for the Mail
data files (-d option). If the file already exists, the new messages
are appended to it. Example: -mr
-wuser-address [,user-address] physical-filename [ physical-filename]
|-wuser-address [,user-address] physical-filename,logical-filename [
physical-filename,logical-filename]
Use -w to specify what files are to be sent to whom, the user address, and
the file to be sent. Specify the name of a file by its physical filename
followed by a comma (,) and its logical filename, or simply the physical
filename. If you are specifying more than one file, you can specify one
file by its physical filename, and the next file by its physical and
logical filenames.
To send more than one file to a user, precede each filename with a space.
Example: -wny4/po1/jbrown c:\doc\list1.txt c:\doc\list2.txt
To send files to more than one user, separate addresses with a comma.
Example:
-wny4/po1/jbrown c:\doc\list1.txt,lanet/sales/margb a:list2.txt
You can also repeat the -w option for each additional user.
Example:
-wny4/po1/jbrown c:\doc\list1.txt -wlanet/sales/margb a:list2.txt
-x
Use -x to activate NetBIOS to notify Mail users about the arrival of
new mail. Example: -x
-ver
Use the -ver option to display the version of this FFAPI program. The
version number appears on the screen, unless you direct it to another
location. Example: -ver
Program: APPLICATION DIRECTORY
Syntax: APPDIR [-imailbox:password input-file [-bffilename]
[-ddrive] [-lenetwork/postoffice filename]]|-ver
Options:
-imailbox:password
Use the -i option to specify the mailbox and the password for the
application. This is assigned to the application by the administrator.
Example: -ijjones:star
-bffilename
Use the -bf option to log all error messages in a file you specify. If
you omit this option, the error messages are directed to standard output.
Example: -bfc:\errors\error.lst
-ddrive
Use the -d option to specify the drive that contains the Mail data
files. If you do not specify a drive, FFAPI searches for the files on
drive m. Example: -dl
-lenetwork/postoffice filename
Use the -le option to get the postoffice address list and place it in
the file you specify. Use this option to specify the network and
postoffice, and the path and name of the file. If the file already exists,
the list is directed to standard output. Example: -lenet4/po1 polist.adr
-ver
Use the -ver option to display the version of this FFAPI program. The
version number will appear on the screen, unless you direct it to another
location. Example: -ver