"Not Enough Memory" Error Occurs When Browsing (107994)

WORKAROUND

To work around this problem, manually insert the path for the computer name and share name.

You may also be able to work around this problem by doing one of the following:

• Run MS-DOS Prompt from the Program Manager Main group, and type exit to return to Windows for Workgroups.
• Run MS-DOS Prompt from the Program Manager Main group, type net view and then type exit to return to Windows for Workgroups.
• Increase the available conventional memory. Depending on your system configuration, you'll need 475 to 600K free for Windows for Workgroups to browse correctly.
• Remove all applications from your Program Manager Startup group.
• Use only one protocol.
• If you are using a third-party shell, switch back to Program Manager.
• The protocol file may be corrupt. Reinstall the protocol.
• Disabling NETWORK DDE may allow you to browse when memory optimization fails.

NOTE: If running MS-DOS Prompt corrects the problem, create a one-line batch file that reads COMMAND.COM /C. If running NET VIEW from MS-DOS Prompt corrects the problem, create a one-line batch file that reads COMMAND.COM /C NET VIEW. Name the batch file FIX.BAT and create an icon in the Startup group using FIX.BAT as the command line and Browse Fix as the Description.