X400: README.TXT: Gateway to X.400, Version 3.0 (107098)

SUMMARY

The following is the text of the Microsoft Mail Gateway to X.400 Readme file.

This document contains important information for administrators running version 3.0 of Microsoft Mail Gateway to X.400. It supplements the information in the Microsoft Mail Gateway to X.400 Administrator's Guide. This document covers the following topics:

• System Requirements
• New X400GATE MS-DOS ErrorLevel Return Codes
• New X400GATE Command-Line Options
• Additional Aspects of the Advanced Address Mapping
• Changes/Additions to the Administrator's Guide
  
  
  • Administrator Program Error Messages
  • Additions to the List of the O/R_Attribute Keyword.
  • Break Absolute Option
  • Expanded Format Section in Appendix G
  • Call User Data Field
  • User Facility Field

SYSTEM REQUIREMENTS

We recommend that the X.400 gateway machine have at least 400K conventional memory free before loading the X400GATE.EXE program.

NEW X400GATE MS-DOS ERRORLEVEL CODES

The X400GATE ErrorLevel codes as documented in Chapter 5, Running the Gateway X.400 MTA, have been changed and are now as follows:

NEW X400GATE COMMAND-LINE OPTIONS

The following X400GATE program command-line options are additions to the ones documented in Chapter 5, Running the Gateway X.400 MTA.

-AP[8883 | 1] Application Protocol Option

This option sets the application protocol value on outgoing connections.

-AP8883 is for ISO.
-AP1 (the default) is for CCITT.

Most systems accept either value.

-RPLY Enable Reply MessageID Capture

With this option all Microsoft Mail messages bound for an X.400 system are scanned to determine whether they are a reply to a message that originated from an X.00 messaging system. If this is the case, the IPMessage ID of the original message that is being replied to is extracted and is converted to the InReplyTo field of the outgoing message.

NOTE: This only works if the user replying to the message copies the original message text into the reply.

This option also displays the O/R name component of IPMessageIDs on incoming X.400 messages.

-F[A311 | NIST] Profile Selection Option

This option affects how the Teletex bodypart is encoded.

-FA311 selects the A/311 profile and causes the teletexNonBasicParams.pageFormats field to be set to '01'H on outgoing Teletex bodyparts as per the A/311 profile.

-FNIST (the default) selects the NIST profile and causes the teletexNonBasicParams field to be left to its default.

For more information on bodypart types see "Specifying BodyPart Types" in Chapter 4 of the Administrator's Guide.

-PMF[0 |1][0|1][0|1][0|1] PerMessageFlag Option

This option controls the values of the perMessageFlag found in the P1 envelope of outgoing X.400 messages.

-PMFxxxx, where 'x' is either '0' or '1'

       |---- contentReturnRequest
      |----- alternateRecipientAllowed
     |------ conversionProhibited
    |------- discloseRecipients
				

Note that the command-line option -Rc also controls the value of the 'contentReturnRequest' flag (sets it to '0'). The -Rc parameter takes precedence over the -PMF parameter. If both -PMF0001 and -Rc appeared on the command line the perMessageFlag would be '0000'.

The default value for the permessage flag is '0001'.

You can specify fewer than all 4 flags.

-PMF1 ---> perMessageFlag = 1001
-PMF01 --> perMessageFlag = 0101

-Ar Reverse Address Rendering Option

This option reverses the address rendering order when addresses are rendered in abbreviated mode.

For example, the default rendering is: -Ar cause the address to be rendered as

-HA Expose Hidden Attachment Option

This command-line switch will expose the hidden attachments generated by the PC Mail system. These attachments contain information about OLE objects. The default (when this parameter is not specified) is to remove these attachments when the message is converted to X.400 format.

ADDITIONAL ASPECTS OF ADVANCED ADDRESS MAPPING

This section contains further aspects of advanced address mapping. It supplements "Advanced Address Mapping" in Chapter 4, Maintaining the Gateway

Multiple Entries for a Single Recipient

In a single Advanced Address Mapping file there may be more than one entry for a single Microsoft Mail recipient. This allows a Microsoft Mail user to receive mail addressed to more than one X.400 address. This is illustrated with the following advanced address mapping file:

   MSM:Msoft/WGC/Peter      X400:o=Msoft;s=Gron;g=Peter;i=E
   MSM:Msoft/WGC/Peter      X400:o=Msoft;s=Gron;g=Peter
   MSM:Msoft/WGC/Peter      X400:o=Msoft;s=Gron
				

This file allows the Microsoft Mail user to receive X.400 mail addressed to either of these three X.400 addresses. When this user originates X.400 mail, the first address in the above list will be used in the originator field.

An additional example is shown below. A Microsoft Mail user is in the process of moving to a new postoffice and would like all new X.400 mail delivered to the new mailbox but would still like to be able to send mail from the old mailbox. The following advanced address mapping file allows this.

   MSM:NewNet/NewPO/NewMBX       X400:o=Msoft;s=Gron;g=Peter
   MSM:OldNet/OldPO/OldMBX       X400:o=Msoft;s=Gron;g=Peter
				

All incoming X.400 mail addressed to "o=Msoft;s=Gron;g=Peter" is delivered to "NewNet/NewPO/NewMBX" but all outgoing mail from either mailbox (new or old) will have the same X.400 originator's address (which will cause any replies to be delivered to the new mailbox).

Wildcard Characters

The wildcard character (*) can be used in X.400 address attributes in the advanced address mapping file. When mapping a Microsoft Mail address to X.400 format, the wildcard does not have any value. When mapping an X.400 address to Microsoft Mail format, the wildcard will match any value.

Here is an example:

   MSM:Msoft/WGC/Peter      X400:o=Msoft;ou=*;s=Gron;g=Peter
				

For an incoming X.400 address, this entry will match an X.400 address with any (or no) value for organization unit. On outgoing mail, the address produced will have no organizational unit.

CHANGES/ADDITIONS TO THE ADMINISTRATOR'S GUIDE

Administrator Program Error Messages

Some of the Administrator program error messages refer the administrator to Appendix B of the Administrator's Guide. This is correct only if you have version 2.1 of the Administrator's Guide.

Additions to the List of the O/R_Attribute Keyword

This list of O/R_Attribute Keywords replaces the list that appears in "Creating and Maintaining the Routing Table" in Chapter 4, Maintaining the Gateway.

   O/R_AttributeKeyword::=  'C'|

                            'A'|
                            'X121'|
                            'T-ID'|
                            'P'|
                            'O'|
                            'UA-ID'|
                            'S'|
                            'OUn'|
                            'DDA.VALUEn'|
                            'DDA.TYPEn'
				

(DDA.TYPEn was missing from the list in the Administrator's Guide.)

Break Absolute Option

Page 88 on Command-Line Options:

The following statement should replace the one on Page 88 Under the description on the -BDmm-dd-yy Break (Absolute) Date Option:

Expanded Format Section in Appendix G

The first example in the Expanded Format section of Appendix G should be replaced with the following:

Call User Data Field

On pages 32 and 38 under "Call User Data:" the following replaces the third sentence:

User Facility Field

On pages 32 and 38 under "User Facilities:" the following replaces the second sentence: