Err Msg: System Error 67... While Connecting to Printshare (104018)
The information in this article applies to:
- Microsoft Windows NT Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
This article was previously published under Q104018 SYMPTOMS
In Windows NT, if you attempt to connect to a shared printer attached
to a print server with a Computer Name of 13 characters or more using
the following command:
NET USE <devicename> <\\computername\sharename>
where <devicename> is the port to be redirected and
<\\computername\sharename> is the network name for the
printing device,
the following error message will appear:
System error 67 has occurred.
The network name cannot be found.
RESOLUTION
To connect to the share, you must use the Windows NT Print Manager or
change the Computer Name of the print server to be less than or equal
to 12 characters.
STATUS
Microsoft has confirmed this to be a problem in Windows NT version 3.1
and Windows NT Advanced Server version 3.1. We are researching this
problem and will post new information here in the Microsoft Knowledge
Base as it becomes available.
| Modification Type: | Major | Last Reviewed: | 11/20/2003 |
|---|
| Keywords: | kbnetwork kbprint KB104018 |
|---|
|