The following files constitute the v3.2 release of GIGAswitch/FDDI firmware:

	NOTE: It is recommended that users upgrade to SCP v3.29, rather
	      than SCP v3.2.

File		Contents				Comments
----            --------                                --------

AGL2
ag2-31.rsx	AGL-2 v3.1 operational firmware		
abk-30.rsx	AGL-2 v3.0 backup firmware

==========

AGL2 PLUS
ag2p-322.rsx	AGP-2+ v3.22 operational firmware	new - update from
							      v3.2
ag2p-32.rsx	AGP-2+ v3.2 operational firmware	new	
abkp-30.rsx	AGL-2+ v3.0 backup firmware

==========

CLOCK
clk-30.rsx	CLOCK v3.0 operational firmware

==========

FGL2
fg2-323.rsx	FGL-2 v3.23 operational firmware	new - update from
							      v3.22
fg2-322.rsx	FGL-2 v3.22 operational firmware	new - update from
							      v3.2
fg2-32.rsx	FGL-2 v3.2 operational firmware		new

==========

FGL4
fg4-323.rsx	FGL-4 v3.23 operational firmware	new - update from 
							      v3.22
fg4-322.rsx	FGL-4 v3.22 operational firmware	new - update from 
							      v3.2
fg4-32.rsx	FGL-4 v3.2 operational firmware		new

==========

SCP TFTP
scp-329.ftp	SCP v3.29 operational firmware		new - update from
							      v3.26
scp-326.ftp	SCP v3.26 operational firmware		new - update from
							      v3.25
scp-325.ftp	SCP v3.25 operational firmware		new - update from
							      v3.23
scp-323.ftp	SCP v3.23 operational firmware		new - update from
							      v3.2
scp-32.ftp	SCP v3.2  operational firmware		new
sbb-31.ftp	SCP v3.1 bootblock			
sdl-10.ftp	SCP v1.0 download code			

==========

SCP MOP ULTRIX 
scp-329.mop	SCP v3.29 operational firmware		new - update from
							      v3.26
scp-326.mop	SCP v3.26 operational firmware		new - update from
							      v3.25
scp-325.mop	SCP v3.25 operational firmware		new - update from
							      v3.23
scp-323.mop	SCP v3.23 operational firmware		new - update from
							      v3.2
scp-32.mop	SCP v3.2  operational firmware		new - MOP ULTRIX
sbb-31.mop	SCP v3.1 bootblock			
sdl-10.mop	SCP v1.0 download code			

==========

SCP MOP VMS
scp-329.sys	SCP v3.29 operational firmware		new - update from
							      v3.26
scp-326.sys	SCP v3.26 operational firmware		new - update from
							      v3.25
scp-325.sys	SCP v3.25 operational firmware		new - update from
							      v3.23
scp-323.sys	SCP v3.23 operational firmware		new - update from
							      v3.2
scp-32.sys	SCP v3.2  operational firmware		new - MOP VMS
sbb-31.sys	SCP v3.1 bootblock			
sdl-10.sys	SCP v1.0 download code                  

==========

MIB
mib-32.txt	GIGAswitch/FDDI v3.2 MIB		new
e-mib-321.txt	GIGAswitch/FDDI v3.2 MIB 		new - update from
		and DEC ELAN MIB			      v3.2
==========

DOCUMENTATION
rn-32.ps	GIGAswitch/FDDI v3.2 Release Notes	new
0readme.txt	This file

=========================================================================

Changes:

	SCP

                SCP v3.29 fixes
                . All fixes done in v3.26
                . Fixed a bug that could cause SNMP to hang.
		. Added a panic "buffer" to the errorlog. The last 
                  10 entries are reserved for panics.
		. Added timestamps to the OBM "Monitor messages".

                SCP v3.26 fixes
                . All fixes done in v3.25
                . Fixes a bug where the SCP could stop sending BPDUs.
                
                SCP v3.25 fixes
                . All fixes done in v3.23
                . Sometimes, if multiple IP addresses were assigned
                  to a single MAC address and ARP serving enabled,
                  a utlb miss exception panic (crash) can occur.
                . "cc integrity 1" panic fixed - involving handling of
                  large numbers of frames directed to the SCP.
                . Panic fixed in hunt group code - plap: invalid tx_inprog 01

                SCP v3.23 fixes
		. Filter matrix names in excess of 32 bytes did not
		  work properly.
		. Static routes did not work.
		. Traps did not work.
                . OBM SNMP GETs/SETs for objects with an IP address
                  instance now work.
                . Delayed port status is sometimes displayed incorrectly
                  in OBM.
                . The buffer area for firmware upgrades was increased.
                  This is required for future upgrades because of the
                  expected increase in size of the code.

	Linecards

                FGL2 and FGL4 v3.23 fixes
                . In Mfg mode a new test was added to test packet memory.

                FGL2 and FGL4 v3.22 fixes
                . Fix for "no hello" bug where the FGL stops sending hello
                  frames under some conditions.
                . Fix for the bug in the code which tries to prevent queues
                  from overflowing. There could be various symptoms including
                  erratic frame forwarding.

	MIB

		MIB fixes
                . Certain parts of e-mib-32.txt should have been
                  commented out. This caused syntax errors.