Firmware updates from the SRM console now require two floppies. To "disk1" copy the following files: ds10fw.txt ds10srm.sys To "disk2" copy the following files: dfxaa320.sys kzpsaa12.sys cipca420.sys hd191x6.sys cd393a0.sys dd393a0.sys kg7320x7.sys To "disk3" copy the following files: pccfwq17.sys pccsm112.sys kzpdc356.sys If you do not want to update any of the firmware on disk2, you do not have to make that floppy. But if you need any of the files on disk2, then all those files listed must be copied to the floppy. To do the update from the SRM console: - Insert disk1 into the floppy drive on the ds10, type "lfu" at the console. - The update utility will run and say that files were not found on CD or floppy, but will then ask on which device the files are located. - Type "dva0" - The LFU will then ask for the name of the firmware files list. - Type "ds10fw.txt" - The LFU will then report as it copies each file. When the files on disk1 are copied, the LFU will ask for the next floppy. - If you have disk2, insert it now and hit , otherwise type "done" - For disk2, the LFU will again report as it copies each file. When the files on disk2 are copied, the LFU will ask for the next floppy. - Insert disk3 and hit , otherwise type "done". - For disk3, the LFU will again report as it copies each file. When the files on disk3 are copied, the LFU will ask for the next floppy. Type done. - When you get to the UPD> prompt, perform updates as normal. It would be a good idea to do a "list" command to see that the images succesfully copied and are listed with the correct revision. The following is an example of a typical update from floppy. P00>>>lfu Checking dka500.5.0.2000.1 for the option firmware files. . . dka500.5.0.2000.1 has no media present or is disabled via the RUN/STOP switch Checking dva0 for the option firmware files. . . Option firmware files were not found on CD or floppy. If you want to load the options firmware, please enter the device on which the files are located(ewa0), or just hit to proceed with a standard console update: dva0 Please enter the name of the options firmware files list, or Hit to use the default filename (ds10io.txt) : ds10fw.txt Copying ds10fw.txt from dva0. . . Copying DS10SRM from dva0. . . Please insert next floppy containing the options firmware, Hit when ready. Or type DONE to abort. Copying DFXAA320 from dva0. . . Copying KZPSAA12 from dva0. . . Copying CIPCA420 from dva0. . . Copying CD393A0 from dva0. . . Copying HD191X6 from dva0. . . Copying DD393A0 from dva0. . . Copying KG7320X7 from dva0. . . Please insert next floppy containing the options firmware, Hit when ready. Or type DONE to abort. Copying PCCFWQ17 from dva0. . . Copying PCCSM112 from dva0. . . Copying KZPDC356 from dva0. . . ***** Loadable Firmware Update Utility ***** ------------------------------------------------------------------------------ Function Description ------------------------------------------------------------------------------ Display Displays the system's configuration table. Exit Done exit LFU (reset). List Lists the device, revision, firmware name, and update revision. Readme Lists important release information. Update Replaces current firmware with loadable data image. Verify Compares loadable and hardware images. ? or Help Scrolls this function table. ------------------------------------------------------------------------------ UPD> list Device Current Revision Filename Update Revision nt 5.70 nt_fw 5.70 srm 7.1-1 srm_fw 7.2-1 cipca_fw A420 dfxaa_fw 3.20 fca_2354_fw CS3.93A0 fca_2384_fw HS1.91X6 kgpsa_7k_fw SS3.20X7 kgpsa_8k_fw DS3.93A0 kzpcc_smor 1.12 kzpcc_fw CQ17 kzpdc_fw 3.56 kzpsa_fw A12 UPD>u srm Confirm update on: srm [Y/(N)]y WARNING: updates may take several minutes to complete for each device. DO NOT ABORT! srm Updating to 7.2-1... Verifying 7.2-1... PASSED. UPD>exit