BASEstartm Open DAS
for Allen-Bradley Data Highwaytm
on OpenVMStm
Installation and User's Guide


Previous Contents Index

Figure 3-24 shows the structure of a legal Timer, Counter, Control, ASCII String, PID Control or Message Control data table address for the PLC-5/250.

Figure 3-25 shows a PLC-5/250 Timer structure.
Figure 3-26 shows a PLC-5/250 Counter structure.
Figure 3-27 shows a PLC-5/250 Control structure.
Figure 3-28 shows a PLC-5/250 ASCII String structure.
Figure 3-29 shows a PLC-5/250 PID Control structure.
Figure 3-30 shows a PLC-5/250 Message Control structure.
Figure 3-25 shows a PLC-5/250 Timer structure.
Figure 3-25 shows a PLC-5/250 Timer structure.

Table 3-18 shows examples of legal Timer, Counter, Control, ASCII String, PID Control and Message Control data table addresses for the PLC-5/250.

Figure 3-24 PLC-5 / 250 Timer, Counter, Control, ASCII String, PID Control and Message Control Address Format


Figure 3-25 PLC-5 / 250 Timer Structure


Figure 3-26 PLC-5 / 250 Counter Structure


Figure 3-27 PLC-5 / 250 Control Structure


Figure 3-28 PLC-5 / 250 ASCII String Structure


Figure 3-29 PLC-5 / 250 PID Control Structure


Figure 3-30 PLC-5 / 250 Message Control Structure


Table 3-18 Example PLC-5 / 250 Timer, Counter, Control, ASCII String, PID Control and Message Control Address Formats
Example Address MMS Type1 Description
$0T20:0.ACC UNSIGNED_32 Timer 0 in file 20 accumulated value
0C91:3.PRE INTEGER_16 Counter 91 in file 3 preset value
0T3:20.CTL/31 BIT_STRING Timer 20 in timer file 3 Enable bit 2
1R6:0.UL BIT_STRING Control 0 in file 6 unload bit 2
0T4:20.TD BIT_STRING Timer 20 in file 4 timer done bit 2
1R6:1.LEN INTEGER_16 Control 1 in control file 6 length value
0ST16:0.LEN INTEGER_16 String 0 in file 16 length value
0ST16:2 VISIBLE_STRING 3 String 2 in file 16
0ST16:3 OCTET_STRING 3 String 3 in file 16
0PD17:2.DVDB FLOAT PID Control 2 in file 17 Deviation Alarm Dead Band
0PD17:2.EN BIT_STRING PID Control 2 in file 17 Enable
0PD17:1.ADDR[0] INTEGER_16 PID Control 1 in file 17 Master-to-slave address 0
0MSG18:3.RLEN INTEGER_16 Message Control 3 in file 18 Requested Length
1T0:5 Structure 4
UNSIGNED_16
UNSIGNED_32
UNSIGNED_32
All of timer 5 in file 0
Control
Preset value
Accumulated value
0R8:10 Structure 4
UNSIGNED_16
INTEGER_16
INTEGER_16
All of control 10 in file 8
Control
Length
Position
0PD17:0 Structure 4
UNSIGNED_32
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
Array of 4
UNSIGNED_16
Array of 14
FLOAT
All of PID Control 0 in file 17
Control
Set point
Proportional gain
Initial gain
Derivative gain
Output bias %
Maximum scaled value
Minimum scaled value
Dead band
Set output %
Maximum output limit
Minimum output limit
Update time
Process variable
Error:scaled
Output
PV alarm high
PV alarm low
Deviation alarm +
Deviation alarm -
PV alarm dead band
Deviation alarm dead band
Maximum input
Minimum intput
Tieback %

Master-to-slave address

Reserved/internal use
0MSG18:2 Structure 4
UNSIGNED_16
INTEGER_16
INTEGER_16
INTEGER_16
Array of 52
INTEGER_16
All of Message Control 2 in file 18
Control
Error code
Requested length
Done length

Reserved/internal use


1Arrays are not supported for structures other than ASCII strings.
2Control bits should be treated as read only and modified only under PLC program control. Modifying these bits from a computer can give unpredictable results.
3Only varying length strings are supported.
4Write operations are not allowed to structures other than to ASCII strings.


Previous Next Contents Index